C-BAND on 1.2m andrews so far so good

[pride21]

hi rd on my fortec star 1.2mtr offset dish with c-band i get
55.5w 22channels
40.5w 110channels
31.5 1channel
27.5w 20channels
18w 2channels
5w 28channels
26.2e 32channels
30.5e 3channels
40e 8channels
49e 4channels
22w 30channels

[Turok]

Hi!
Very Good!!
what,lnb ,do you using,normal 14/18 V Switching,or one with polarizer?
try also now on 37,5 W in Cband Metro Tv,from Ghana,Signal since 5 Days,are very strong ,before,it was weak ,and you need up to 2 meters!

on 30,5 e i reveive every transponder,but eastbeam only 35% Signal in dvb 2000

[Rd100]

Very good are you using the 65mm lnb holder which you can get for the 1.2m fortec star which you can see here http://www.sadoun.com/Sat/Products/S/LNBHolder3.htm also the Conical Scalar ring which they sell looks good http://www.sadoun.com/Sat/Order/LNBFS/C-Band-LNBF.htm

Do you have any pic of you dish with the c-band lnb on it you can post up,

hi rd on my fortec star 1.2mtr offset dish with c-band i get
55.5w 22channels
40.5w 110channels
31.5 1channel
27.5w 20channels
18w 2channels
5w 28channels
26.2e 32channels
30.5e 3channels
40e 8channels
49e 4channels
22w 30channels

[Rd100]

14/18 v switching with di-electric plate for circular satellites

Hi!

Very Good!!

what,lnb ,do you using,normal 14/18 V Switching,or one with polarizer?

try also now on 37,5 W in Cband Metro Tv,from Ghana,Signal since 5 Days,are very strong ,before,it was weak ,and you need up to 2 meters!

on 30,5 e i reveive every transponder,but eastbeam only 35% Signal in dvb 2000

[pride21]

thanks turok,rd i am using 14v/18v switching, the first holder i made out of 52mm copper tube then i bought proper holder from sadoun,the connical feed i made from an original polar feed.i will get some pics as soon as i can,i found the di-electric plate increased the signal when two eighth from opening.

[pride21]

this is a pic of dish with c-band you can see how i staggered feed to make it connical then inserted 1 inch wide ali, the same size as each ring

[ndiqbal]

Is it possible to pick up Pakkssaat on 38E with a 1.2 Andrews Channel Master Dish in the UK?

[Montafon Guy]

.. sorry friend:


Not even with 2,4 m -
you need about 3 - 4 m for receiving this Satellite!


Regards Montafon Guy!

[dx qwer]

Hello,

I would say that you need a >5m dish.

Here in south western of Germay I only get a few frequencies with small and weak signal.

Best Regards
Edgar.

[Turok]

hi!
in around 1,5-2 years,****** will also be replaced!
on packsat kuband,also in pakistan it self the have reception problems
in the last 3 month,many freqencys has been changed,some comes new,and old switched off,is there now a difrent in some singal receiving then before the change edgar?

[dx qwer]

Hello Turok,

no, it all remains the same. Nothing changes!

Best Regards
Edgar.

[Turok]

how,is the p.a.k.s.a.t. signal on your 4,5m andrew dish?

[Montafon Guy]

Hello Turok ,


in one Word: ugly!

And the Programs are not very interesting for me either!


Regards Montafon Guy!

[Turok]

yes there are many test cards on it,signal,on daytime,is lower then on night time!

what is the strongest transponder at the moment?
would be very intresting,to find out the difrence between 3,60m mehs and 4,5 m andrew on p.a.k sat,dx quwer and you should make a blindscan,lets say,tomorow,evening @ 20 h,and find,to find out,how many channels more ,the andrew antenna can catch!
i hope you have good signal on the rusian ntv channels on 36 east to in kuband?

[dx qwer]

...signal,on daytime,is lower then on night time! ...

Hello,

in case of 38°E in Germany, this is not true!

Best signal is here ~ between 10.00 GMT+1 and 13.00 GMT +1. Some times signal quality is different later/sooner.

Power TP are (for me) 4104 H and 4055 H. I didn´t get anything from vertikal polarisation.

Best Regards
Edgar.

[Turok]

but some signal disapear,during day and night time ,you told me?
but i forgot the transponders!

[Glenn_911]

hi rd on my fortec star 1.2mtr offset dish with c-band i get
55.5w 22channels
40.5w 110channels
31.5 1channel
27.5w 20channels
18w 2channels
5w 28channels
26.2e 32channels
30.5e 3channels
40e 8channels
49e 4channels
22w 30channels

Can somebody please tell me if this list is still current for today ?


Cheers


Glenn_911

[dx qwer]

Hello Glenn_911,

no, this list is about 2 years old and not up to date!

It´s more important to have frequencies of strong satpositions for 120cm dish and not, how much programms you can get with 120cm .

Regards
Edgar.

[Glenn_911]

Hello Glenn_911,

no, this list is about 2 years old and not up to date!

It´s more important to have frequencies of strong satpositions for 120cm dish and not, how much programms you can get with 120cm .

Regards
Edgar.

Hello dx qwer


Can you please help me with a few strong transponders on the NSS 806 40.5 west, specialy the Latin's channels ?

The size of my dish is 1.2

Best wishes Glenn_911

[Satcom1]

This device makes a huge improvement on C Band Offset dish systems.

To get construction details search Walrus1957.

Also WS International sells a good Conical Feedhorn for a fair price.

[Trust1]

Hello Glenn_911,

no, this list is about 2 years old and not up to date!

It´s more important to have frequencies of strong sat positions for 120cm dish and not, how much programms you can get with 120cm .

Regards
Edgar.

@ Edgar , Glenn send me the PM of You with the list of freq.
In that PM You are mention , its better to use a waveguide instead of the dielektrikum .
Can You tell me what that look like and how it works ?
I already found signal (and picture) at 40.5 W TP 3.977 TV BRASIL
Signal to on 55.5 W TP 4.134 but coded

Test done with Maxplus 2100 and Fibo gregorian dish .
Steered by Pace MSP 995
Corotor with no scalaring at all in front of the subreflector .

[dx qwer]

Hello Trust1,

a Waveguide feed brings about ~3dB, that´s much especially for small dishes. If you use a dielecrtica plate you loose more signal (dB).

For PFA you must use a scalarring in front of the feed for C-Band!

If you want to see fotos of my dish with the waveguide feed, have a look here: _http://forum.dxtv.de/wbb/thread.php?threadid=7883&threadview=0&hilight=&hil ightuser=0&page=15

Best Regards
Edgar.

[Trust1]

Thanks , the org. KU-feedhorn on the Fibo gregorian dish has a diameter of 90 mm .
On his place I put the polarotor , i've tried it with PF scalaring , TRF (conical feed) and a home made 95 mm scalaring .
The best result was brought by the plain corotor , but the same result came with the 95 mm ring , therefore I have to move the polarotor further away from the subreflector .
Since the subreflector (230 mm) brings a spot of ± 90 mm , I think its useless to use a scalaring .

I've tried it also as a normal Offset dish , but that did'nt work better .