Zenega SW backup

[nithkumar]

Hi,
i would like backup my zenega software to my pc.
shall i do as follows.
1. Download loader
2. Shutdown pc and stb
3. Connect stb and pc with rs232
4. Start pc
5. Open loader
6. select proper com port.
7. select "database upload mode" frm dropdown menu in loader.
8. click on start.
9. provide filename as zenega and select
destination.
10. start stb.
11. extraction starts showing progress both in
loader and stb.
12. close when done.
13. disconnect stb securely.
14. rename saved file as zenega.bin.
15. this file should be 322 KB in size

After uploading from the receiver to pc, will the receiver work?
since i do not know wheather the SW will copy or move to pc.
pls help me. Any one got success.

[subra007]

Yes i successfully extracted the firmware from stb size 322kb.

[dspdsp]

So if we modify this file and upload it to STB . Will those settings be effective on STB?
Has anyone done it successfully?

[dspdsp]

Then we should be able locate JTAG port on STB and try to burn ROM with h**ked firmware. I don't know how to identify JTAG port on board and do the wiring and run utility to take backup then edit ROM image and burn it back to STB.

If any one could do this then it will be very helpful to all.

[dspdsp]

According to me , this port can be connected to computer through some hardware and then we can reprogram it the way we want. Just google "JTAG Programmer" you will find such devices.

[dspdsp]

Thats true. STB to STB is easier method no need to locate JTAG port , soldering and all and almost no risk.

[sanjukharb]

New software for Zenega STB to STB ....... Code is 6834 Ver. 155

[acube4u]

i m unable to extract software from old Zenega box, i am able to extract from new boxs, what must be the problem ???

[sipep]

help please,needed zenega CD1004S bin file/firmware.

[mohsams2009]

hi
could u please tell me how to do that