How to allign Technomate 7100 & TechniSat Multytenne dish 4 ASTRA 19.2E, 13°E,.23.

[Peace1er]

Hi

I'm using a Technomate TM-7100 Triple Tuner HD with a 45cm TechniSat Multytenne dish and I'm in London, England, UK SEE PICTURES for Ideas

How to allign or (set up) The TechniSat Multytenne dish LNBs for ASTRA 19.2E, HOTBIRD 13°E,.23.5, and 28.2°E

1 Tuner Connection : Single, Twin or Loopthrough?

2 Satellite set up: Tuner 1, 2 (Both Tuner 1 or 2) ?
b) LNB Type: Single, OCS, Universal?
c) DiSEqc 1.0,1.1 (1,2,3,4 etc..)?
d) How do you do a 4/1 DiSEqC Position ?

3 Motorised Setting: OFF, 1.2, USALS?

etc....etc...etc...?

Step by step guide?

Any input is greatly appreciated......

[rolfw]

Moved this from the Pictures of Members' setups section.

If you have the single output Multytenne, using a loopthrough will cause conflicts if you wish to watch channels on one satellite and record from another.

LNB type should be Universal and set DiSEqC switching to DiSEqC 1.0 or 1.1 ,DiSEqC ports should be set to: DiSEqC 1 for Astra 19.2, DiSEqC 2 for 13 East, DiSEqC 3 for Astra 23.5 and DiSEqC for Astra 28.2.

[satelliteman]

Question 3/ DiSEqC Motor option should be OFF.

[Peace1er]

Before Scanning should I Select all 4 or just Astra 19.2E?

and then

Blind Scan or Auto Navigation?

[satelliteman]

Set up the DISEqC configuration for all 4 satellites and scan / blind scan them one after the other. Auto navigation may scan each after one another (I've only ever used the auto nav feature with a motor).