I am loooking for dish sizes in the uk of 1 west intelsat 10-02, as i ca get thor 0.8 fine but not intelsat so i wounder if it is dish size. please report back thanks MarkJose
| Fringe Reception General | |
I am loooking for dish sizes in the uk of 1 west intelsat 10-02, as i ca get thor 0.8 fine but not intelsat so i wounder if it is dish size. please report back thanks MarkJose

I have no trouble receiving 10-02 with a rusty old 60cm. Sky mesh dish in the west of East Anglia
Llew
Had it on a shiny new 60cm too here in Kent.
Maybe check your line of sight and adjustments.
It might be down to the line of sight or dish size now i think could be line of sight but it is weird how i get the t1 beam of thore come in at 90% but no intelsat. i am putting on a larger pole tomorrow to get over the roof line so i can get freesat HD
DiSEqC Motor Installation Setup Guide ~~ Quick Reference USALS Set up Guide
Dish Pointing Calculator
..Satellites UK site Advertisers....
Hi Markjose,
Digi Film (1w Intersat 10-02) Ok on 35cm zone1 S@y dish.
North east (55n...1.4w).
Is your STb loaded with (Laurals53) Channel setting, if Yes.
Digitv and Thor have two Sat positions. Thor, (0.8w) is
under the heading (Thor).
Digitv, (Intelsat 10-02) All 100 plus channels can be
found under the heading (Intelsat 707)
Your dish once on Thor will moove 30mm to
Intelsat (1w) from Thor (0.8w) when you change
to (Intersat 707).
Its use on the (Humax HDCI2000) STB.
707 is at 1w not 53w.
BF...
i Just moved it up the pole still no freesat but all of thor now, might get a installer to finish the Job off as i don't want to put more then 3 meters up as it would sway in the wind
There are currently 1 users browsing this thread. (0 members and 1 guests)
The Meeting Place
Bookmarks