Receivers which work with the MR and those which don't

[antoniom]

just had mr patched into a nextwave 2500 embedded ucas. working great. rob43

I have a nextwave 2500c I've bought it already patched with mr 1.130. I can't figure out how to add /change or update keys. Woul you be so kind to help me out? Thanx

[chrislloret]

Technisat Digicorder1 and Matrix Rev 2.13 works well on Hispasat as well as on Astra and Hotbird. Too much south for Thor or Sirius. Every 20-30mins a short "inicialising cam" message apears, even on free channels,this message is not seen on recordings.
Greetings
Chris

[john43]

works with problems on the Xtreme
Though the Xtreme with the dsc 911 uz emu works fine without th MR 1.14
Yu dont need the MR at all!!!
All open here polsat multivision tps dutch channels with no cards or cams inserted


john

[johnefputterill@tisc]

Will Mr Work With Fortecstar 6100?
I have now upgraded Fort Star Ultimate.

[Hisham Shafai]

I have purchased MR one year ago and never got any benefit with my patched Humax 5400z I tried everythig the Humax recognizes the cam as MR 1.081 but not opening any channel even with valid legal cards , asking friends for a solution, thanks.

[miky01]

Work on Humax 5300 but some time "red popup" with tp$crypt chanels.

[sorarona]

thanks for all

[AlfaSierra]

ID DIGITAL CI-24 Econo works 100% with MR cam

[xxl]

neotion 1000s were any solutions??

[Memran]

fortec star fsmci-6100 - works with MR and Dragon

[mumtazrizvi]

Hi Dear Mates

Good Afternoon

Please add following STBs compatible with the MR/MRV, thanks :

1- Technosat 6000plus (built-in conex 2 CIs)
2- Technosat 5500plus (built-in conex)
3- Starsat 3500CUCI (2 embeded universal 2 CIs)
4- Starsat 3200 (2 embeded universal)
5- Fortec Star

All the above STBs are available in the South East Asia, so please forgive
me if it is not available in European Countries.

With best regards/wishes

Mumtaz Rizvi

Started this thread so that any member can add their experiences.

Tested by me.

BEC 6600ci Works well, also for reflashing
Digiquest 2000ci Works well, also for reflashing
Hyundai HSS800ci Works well, but havent tried with uninitialised MR.

What I've heard.

Humax 5400 Works with the MR, has problems with initialisation after flash upgrade, but can be made to work
Hyundai HSS1000ci Doesn't work well at all with the patched embedded CAM.
Comag (Lidl cheapie) Works, not sure about flashing.
Echostar Whole range appears to work
Samsung 9500 Works
Nokia 9800 Works with some sofware versions

[vehla_jatt]

can i use matrix with zenega 1005s thanxxxxxxx

[Phildeal]

Bigsat 8005 is Ok.

[gfcc1]

hi koan extreme 550 works fine with mr too

[safia]

Work fine <img>

MR fine
MRV Clears all channels but problem zapping

[Striker10]

Matrix reloaded with a strong model 4375 s/n that doesn't fall within the firmware from 03 on the official site doesn't work. The other models with the 03 release may be compatible, but ask incase.

[florence]

working fine with the finepass 5000 tdr

[vehla_jatt]

hello ..plz some body i want 2 buy stb 4 mr ..vich is cheap one ......and can i use dis mr with humax ......thanx

[tedy58]

My Yumatu 8700CI http://www.yumatu.com.tr/download_tr.aspworks fine with MM, MR, MRv, but with the latest work without the cards

[gr_pantsch]

topfield 5000 ci working fine too

[rkhsaw]

Humax CI5100. works fine but you do need to re-initialize the cam after an update (I do it in a laptop). Also, only works in slot 1 (in my receiver anyway)

[jaxom]

Works, or rather worked, fine with an Echostar DBS890 which I bought last September. I say worked because I have an MII and could get C*n*x but not anymore. I also have an Infinity USB proggy and I am now wondering what other Cam or card to get. Any suggestions would be greatly appreciated.

[sterlingronald]

works well with my gbsat 2ci-o

hi pie man I also have a gbsat 2ci receiver could you explain to me how you got the mr working please sterlingronald and could you tell me which smart card or cards you use with it.

[paultm]

Neotionbox 3000 works fine

[UT666]

works fine on HUMAX F1VACI.