Kaon Receiver For Dish Tv

[Foxtell]

Any information about Kaon Receiver, Now DISH TV are providing Kaon Receiver Model KSC-100 for INDIA Viewers.... HELP.

[electronic_doctor]

Any information about Kaon Receiver, Now DISH TV are providing Kaon Receiver Model KSC-100 for INDIA Viewers.... HELP.

hello bro ow r u .....bro i need master code 4 ksc-100.......i think u can help me ......thanx in advance

[mhku]

_http://www.satellite-heaven.de/kaon/index.htm

[Foxtell]

_http://www.satellite-heaven.de/kaon/index.htm

Thax for right reply, but sorry there is no any currect information for that model.........

Unknown H/W Unknown H/W2M?MKaon KSF/KSC-100EchosatX-5CIManhattan Plaza 1100 SKaon KSF- H230Xtreme XSF-550 FTAKaon KSF-(V)200 CX/ SCOKaon KPSF-200 SKaon KSF-V200 SKaon KSC-360Kaon KSF-360 MKaon KSC-V370 K/ CX

[ppsingh05]

Thax for right reply, but sorry there is no any currect information for that model.........

Unknown H/W Unknown H/W2M?MKaon KSF/KSC-100EchosatX-5CIManhattan Plaza 1100 SKaon KSF- H230Xtreme XSF-550 FTAKaon KSF-(V)200 CX/ SCOKaon KPSF-200 SKaon KSF-V200 SKaon KSC-360Kaon KSF-360 MKaon KSC-V370 K/ CX

I have kaon ksc100 dsr.I want open all dish channel without any smart card.Please send me any patch software.
my email id: ppsingh05@yahoo.co.in

[electronic_doctor]

Dear Mr. Singh
If U get this software pl pm to me at bsingh_bs@yahoo.com



UOTE=ppsingh05]I have kaon ksc100 dsr.I want open all dish channel without any smart card.Please send me any patch software.
my email id: ppsingh05@yahoo.co.in[/QUOTE]

[lokesh]

I have updated receiver given by dishtv kaon to ksf 500z enjoy....

[TR KHAN]

I have updated receiver given by dishtv kaon to ksf 500z enjoy....

sorry lokesh,
what do you mean by ksf 500z, i tried but .....

COM1 Connected !
-. Target loader version :L 216
-----------> Front :: 74HC164 used (connector: 14pin)
-----------> Target 2M Flash.
-----------> Target SST FLASH-2M (39VF1602 Bottom).
STB normal start.
[ Upgrade mode. ]
""
File open error, please open file first!
COM1 Off !!! ("Enter" key to reconnect.)

[TR KHAN]

Sunny AT-1030DCIA ( Sky)(Z)

s/w v 02.00.05 Last update Apr 20 2004, CA 2.2.1, Sunflower Menü alt

Utility: 6 Games (Tetris, Hexa, Puzzle, Mine, Snake, Sokoban), Kalender, Zoom, @ Sky video link,

Freeze, Programmsperre v5.8.19, Toneburst,

Infobanner noch ohne PMT, SID und mit now/ next Info mit Details,

crypts blinken stehen aber nicht im Infob., 8 Favoriten + Genre, TV Liste 7 Sender pro Seite

s/w v 02.00.04 Last update Mar 19 2004, CA 2.2.1, Sunflower Menü alt

Utility: 6 Games (Tetris, Hexa, Puzzle, Mine, Snake, Sokoban), Demo, Kalender, Zoom, @ Sky video link,

Freeze, Programmsperre, Toneburst,

Infobanner noch ohne PMT, SID und mit now/ next Info mit Details,

crypts blinken stehen aber nicht im Infob., 8 Favoriten + Genre, TV Liste 7 Sender pro Seite

s/w v 02.00.04 Last update Feb 23 2004, CA ?, Sunflower Menü alt

Utility: 4 Games (Tetris, Hexa, Puzzle, Snake), Demo, Kalender, Zoom, @ Sky video link,

Programmsperre, Toneburst,

Infobanner noch ohne PMT, SID und mit now/ next Info mit Details,

crypts blinken stehen aber nicht im Infob., 8 Favoriten + Genre, TV Liste 7 Sender pro Seite

s/w v 02.00.04 Last update Jan 29 2004, CA 2.1.9, Sunflower Menü neu

Utility: 4 Games (Tetris, Hexa, Puzzle, Snake), Demo, Kalender, Zoom, @ Sky video link,

Freeze, Programmsperre, Toneburst,

Infobanner noch ohne PMT, SID und mit now/ next Info mit Details,

crypts blinken stehen aber nicht im Infob., 8 Favoriten + Genre, TV Liste 7 Sender pro Seite

s/w v 02.00.03 Last update Dec 19 2004, CA 2.1.9, Sunflower Menü alt, Bootlogo

Utility: 7 Games (Tetris, Hexa, Puzzle, Slider, Mine, Snake, Sokoban), Demo, Kalender, Zoom, @ Sky video link,

OTA, Toneburst, Menüsperre lässt sich nicht ausschalten

Infobanner noch ohne PMT, SID und mit now/ next Info mit Details,

crypts blinken stehen aber nicht im Infob., 8 Favoriten + Genre, TV Liste 7 Sender pro Seite

Das selbe auch mit:

S/w v 02.00.03 Last update Nov 13 2003, CA 2.1.9

S/w v 02.00.02 Last update Sept 27 2003, CA 2.1.9

[lokesh]

ALL ABOUT KAON RECEIVER

Friends, I required some genuine help from all of you. I have put up my receiver into serious trouble. I have a KAON receiver from www.kaonmedia.net I have purchased this receiver to use legal service from DISHTV INDIA (www.dishtvindia.com). Although the receiver make and model is similar to ‘KAON KSF 100 CO’ but its hardware and software version have been modified and it shows the following version.

Loader version: - 2.1.6

H/w: - 01.00

S/w: - 01.05.00

Model name: - KSC-100 MCO. (The model name I think probably have been changed)



Actually I have crashed the receiver software. I tried to reload the software but didn’t find any matching software. Lastly I got angry and updated my receiver with KSC-511Z

H/w: - 12.05.A5

Using the loader called KUP230 in engineering mode. Finally my receiver started. Everything is working fine except one great problem. I AM NOT GETTING ANY SIGNAL. One important thing I noted is that, I can see a flashing logo of ‘CROSSED DISH ANTENNA’ on left top of my TV screen.



Another important thing is that I might have damaged my receiver’s serial number and U/A number during all this up gradation. Without this I cannot watch my legal subscription.



Now I have opened up my receiver and carefully noted each and every hardware to get help from all you friends. I am providing all these details below.



Loader Version: - 2.1.6

H/w: - 01.00

S/w: - 01.05.00

Model name: - KSC-100 MCO



SYSTEM RESOURCES:-

Flash Memory: - 2 Mbyte

SDRAM: - 16Mbytes

Main CPU MPEG Chip: - STi5518



TUNER

SHARP

Frequency range: - 950MHZ-2150MHZ

Symbol Rate: - 2-45Mbaud

Demodulation: - QPSK

Input Connector: - F type female (75 ohm)

Fec Mode Rate: - ½, 2/3, 3/4, 5/6, 7/8.



OTHER

Integrated CONAX + one blank CI Module.

Memory: - 39VF 1602 (from SST)



After up gradation to KSC 511Z

H/w: - 12.01.A5

S/w: - 02.00.00

Ca: - 2.2.2



Friends, please help me to get out of this situation. The service is not accepting the receiver due to self alteration and demanding very much. So, please tell me which software will work with my model and how can I get Serial number and U/A number of my receiver back.

Please provide a genuine help. I will also send the same text to KAONMEDIA help desk.

Hoping for a positive reply soon.

Good day..

[TR KHAN]

http://www.satellite-heaven.de/Recei.../kaon-k100.jpg

Kaon KSC-100: DVB-S, 4080 Ch., Common Interface

Please help we need loader for that model.

[TR KHAN]

ALL ABOUT KAON RECEIVER

Friends, I required some genuine help from all of you. I have put up my receiver into serious trouble. I have a KAON receiver from www.kaonmedia.net I have purchased this receiver to use legal service from DISHTV INDIA (www.dishtvindia.com). Although the receiver make and model is similar to ‘KAON KSF 100 CO’ but its hardware and software version have been modified and it shows the following version.

Loader version: - 2.1.6

H/w: - 01.00

S/w: - 01.05.00

Model name: - KSC-100 MCO. (The model name I think probably have been changed)



Actually I have crashed the receiver software. I tried to reload the software but didn’t find any matching software. Lastly I got angry and updated my receiver with KSC-511Z

H/w: - 12.05.A5

Using the loader called KUP230 in engineering mode. Finally my receiver started. Everything is working fine except one great problem. I AM NOT GETTING ANY SIGNAL. One important thing I noted is that, I can see a flashing logo of ‘CROSSED DISH ANTENNA’ on left top of my TV screen.



Another important thing is that I might have damaged my receiver’s serial number and U/A number during all this up gradation. Without this I cannot watch my legal subscription.



Now I have opened up my receiver and carefully noted each and every hardware to get help from all you friends. I am providing all these details below.



Loader Version: - 2.1.6

H/w: - 01.00

S/w: - 01.05.00

Model name: - KSC-100 MCO



SYSTEM RESOURCES:-

Flash Memory: - 2 Mbyte

SDRAM: - 16Mbytes

Main CPU MPEG Chip: - STi5518



TUNER

SHARP

Frequency range: - 950MHZ-2150MHZ

Symbol Rate: - 2-45Mbaud

Demodulation: - QPSK

Input Connector: - F type female (75 ohm)

Fec Mode Rate: - ½, 2/3, 3/4, 5/6, 7/8.



OTHER

Integrated CONAX + one blank CI Module.

Memory: - 39VF 1602 (from SST)



After up gradation to KSC 511Z

H/w: - 12.01.A5

S/w: - 02.00.00

Ca: - 2.2.2



Friends, please help me to get out of this situation. The service is not accepting the receiver due to self alteration and demanding very much. So, please tell me which software will work with my model and how can I get Serial number and U/A number of my receiver back.

Please provide a genuine help. I will also send the same text to KAONMEDIA help desk.

Hoping for a positive reply soon.

Good day..

How foolish you are without backup you did it..... rubbish.

[lokesh]

please advise something. u can say me foolish. any way please tell how can I take backup. which software according to u will work?

[lokesh]

should I go for sunny? or some other? please advise with the url to get software

[lokesh]

ok Mr TrKhan sir, can u provide me the original software used by dishtv for kaon receiver so that atleast I can bring back the original menu back. Or any one else can provide please.
my email lk_pat@yahoo.com

[Tom Robert]

I have new and updated software of Loader Version: - 2.1.6, H/w: - 01.00,S/w: - 01.05.00 for Model - KSC-100 MCO fully workable for Dish TV same as I firstly got updated software of ZENEGA than anyone.

[TR KHAN]

please advise something. u can say me foolish. any way please tell how can I take backup. which software according to u will work?

TOM ROBERT will help you i think he has loader. if you send me your STB no i will try my best.

[lokesh]

can u provide me this software tom. please.
after updating to 511z I am getting a crossed dish antenna logo flashing on left top of my tv screen
my standby button on receiver is not working and my led in front panel displays 8. .8.8 in stand by mode

please help. thanks

[lokesh]

ok friends, here I am giving some information about conax CA for kaon ksc100mco receivers.
software version:- 03.01.03
interface version:- 0x40
no. of session:3
language:- 2c
ca-sys-id:- 0x0B00

[lingaraj_h]

I have new and updated software of Loader Version: - 2.1.6, H/w: - 01.00,S/w: - 01.05.00 for Model - KSC-100 MCO fully workable for Dish TV same as I firstly got updated software of ZENEGA than anyone.

How can i Remove rebooting

[lingaraj_h]

I have new and updated software of Loader Version: - 2.1.6, H/w: - 01.00,S/w: - 01.05.00 for Model - KSC-100 MCO fully workable for Dish TV same as I firstly got updated software of ZENEGA than anyone.

I facing A Problem Rebooting A Recivre

[TR KHAN]

I have new and updated software of Loader Version: - 2.1.6, H/w: - 01.00,S/w: - 01.05.00 for Model - KSC-100 MCO fully workable for Dish TV same as I firstly got updated software of ZENEGA than anyone.

Dear Tom,
if you have any magic please put here....otherwise bhuto kay KAON ka katl ho jaega.......

[lingaraj_h]

Can Anybody Hack Software For DISH TV New Decoder KAON K100

We are facing a lot of Problems with KAON K100 Receiver, When I switch on My Receiver That shows massage on TV every time As Below and It's take 45 to 50 Seconds

System Installing

12688Mhz, 27500Kb.v

Searching for a new software

Rebooting please wait…

After itself automatically off, After when I switch on the receiver that shows the above Mentioned massage that takes 45 to 50 Seconds even One minute Than work perfectly, can anybody solve this problem

I think this Decoder not user-friendly and Picture quality is poor and Sound quality is not good

[lokesh]

No I think the picture and sound quality is ok. But the problem is with booting. when I changed the receiver software with that of kaon 511z firmware then it booted rapidly. All this hapenning due to Dishtv software modification according to there use. let's complain this to dishtv.
I have a few question
1) how can I update software by set-to-set method?
2) how can I take a backup of my receiver using my pc.

any way here r some of the information which my pc received from Kaon ksc100 receiver by dishtv using Hyper terminal.Please have a look and give comments.

AVMEM SIZE = = = = 100000

STAVMEM_Init()=OK
STAVMEM_CreatePartition()=OK
STEVT_Init()=OK
STPWM_Init()=OK
STCLKRV_Init(CLKRV0)=OK
STI2C_Init(back)=Ok
STI2C_Init(front)=Ok
DECN_Init()=OK
VTG_Init()=OK
STVID_Init(VID0)=driver changed at 3 April 2003=Ok
OSD_Initialize=(OK)
==============================================
Version 2.1.6 v1
Date Apr 01 2005, Time 23:04:21
NO MICOM : [EuroLoader - Sat384] 1/2M !
==============================================
[FE] Version : 02.03.00 Last Update : 2004.06.16
================> HW_Ver = 0x12C501 : 0x0D, 0x2A, 0x4A <=================
DVB TYPE = 0x1 !!!!
BOARD TYPE = 3 !!!!
CI STATUS = 1 !!!!
VIDEO INVERTED !!!!
gIS_LEDFront = 2
___C_1 Detected !!! gIS_LEDFront= 2, gHEAD.mcVideoInvert = 1
HWC_VideoInvert(1)
[0], CH_ADDR[0xc0182cc4], CH_IDX[15], TUN_ADDR[0xc0082c90], TUN_IDX[0]
BOOTLOADER :: TS SERIAL = 0
[REREADCLOCK] 0-0-0, 0: 0. 0
FLASH ID: 0x234a, COM ID: 0x00bf
sdVerifyMasterOrSlaveThroughPC() = 1
NO_ACKNOWLEDGE with PC.
___ V300 BOARD DETECTED !!!!
Hdl->mcChanType = [0x0c]
Hdl->mcTuneType = [0x89]
[0x00] SHARP 0614 Is detected !!!
Hdl->mcChanType = [0x0c]
Hdl->mcTuneType = [0x89]
FE_GetTunerName(0) = ZL10
FE_GetTunerName(1) = ZL10
HW OUI:0008b9 mdl=0x2802 ver=0x0100 msk=0x0000
SW OUI:0008b9 mdl=0x2802 v
*jumpCode = 0xffffffff
gFLASH_BASE = 0x7fe00000
Jump : 0x7feffffe

STAVMEM_Init()=OK
STAVMEM_CreatePartition()=OK
STEVT_Init()=OK
STPWM_Init()=OK
STCLKRV_Init(CLKRV0)=OK
STI2C_Init(back)=Ok
STI2C_Init(front)=Ok
STCLKRV_Open(CLKRV0)=OK
STAUD_Init(AUD0)=Ok
STDENC_Init(DENC0, InvOut 0)=OK
STVTG_Init(VTG0)=Ok
STVID_Init(VID0)=Ok
OSD_Initialize(OK)
[FE] Version : 02.03.00 Last Updat6
SetPort4 = 0::________GPIO_ReadPort4 = 0x1f
SetPort4 = 1::________GPIO_ReadPort4 = 0xff
THIS IS LOCOST NORMAL FRONT !!!
___C_1 Detected !!![0], CH_ADDR[0xc009a31c], CH_IDX[15], TUN_ADDR[0x7fe11c64], T
UN_IDX[0]
[REREADCLOCK] 2002-1-1, 0: 3.13
size : 148
NO SCART..
NO SPDIF..
=============================================
VERSION : 2.7.5 (2005.03.25)
MODEL : KSC-100MCO (BUYER CODE : 40)
DATE : Apr 15 2005
TIME : 17:10:31
=============================================
FLASH = 0x234a
[MC] Version : 02.02.03 Last Update : 2003.10.21
[TTXOSD] Version:02.01.09, Last Update:05.03.04
[PSI] Version:3.0.0, Last Update:05.01.14
[DB] 4000CH, 8FAV, EPG_WEEK:ON, NEW_COLOCK:OFF, GUI_T:OFF, __K4_OPTION__:OFF, (1
92512,3570)
[CONAX] Version:3.1.3, Last Update:05.02.04
####### CI DETECT #######
[CI] Version : 02.02.02 Last Update : 2004.02.02
Hdl->mcChanType = [0x0c]
Hdl->mcTuneType = [0x89]
Hdl->mcChanType = [0x0c]
Hdl->mcTuneType = [0x89]
FE_GetTunerName(0) = ZL10
FE_GetTunerName(1) = ZL10
[CONAX] Initialize complete
MMI_TYPE :: MMI_K15
MMI_API_VERSION :: 5.2.0
MMI_FLASH_VERSION :: 1.0.0
MMI_E2PROM_VERSION :: 1.0.1
MMI START OK : fa0
Statusbar2 : Reading the Smartcard

[Vivek]

Great Lokesh,
You have done lot of work....