Hi all,
Have just joined the forum and need some help. On inserting card to programer I keep getting message "No ATR" can do anything even erase card, can anyone help?
Thanks in advance!
| Super cards: Titanium, MII, Knot Card, Opos, Cerebro, Daytona | |
Hi all,
Have just joined the forum and need some help. On inserting card to programer I keep getting message "No ATR" can do anything even erase card, can anyone help?
Thanks in advance!
Waht programmer is it? I thing you iisert your upside down - Please try chip facing down.
Every little helps and a little help goes a long way!
Hi Jaffer,Originally Posted by Jaffer
The programmer is Infinity USB Phoenix Compatible. I alway put card in upside down and never had this problem before, I think maybe the card is dead. Any suggestions?
Thanks for your help.
rgds Renos
got same spec and same problem!no ATR!cant erase!any help out there?ATR Resureccion BETA software does not help!thanx
...If you can go to Dudez or the Den and download The latest TMB file from the Conax section ( TMB 2.6 ). When you unzip it you will find two folders, one is the TMB file the other is the latest TMB editor which has a TIT card programmer built in. It is by far the best I have seen , it can do it all and is very quick. It also has an inbuilt TiT card tester.
When you first open the file it will be set to EDITOR, but there are 5 words across the top, they are.
FILE.....EDITOR......CARD MENU.....PROGRAMMER........ABOUT.
Move your mouse over programmer and click it you will fine 5 options write hex, write eep, erase Tit , write Tit, and lastly TEST Tit.
There is also some info and some spare ATR's listed in the readme, you pick the one that best suites your needs. Then you use the TMB editor to to put the ATR on to your card.
Don't mind my spelling
SORRY!!!!!!!!Still having problems!the tmb doesnot see the card!helllllllllllllllllllllllllllllllllllllllllll p
Have you tried
http://www.rdi-sat.com/uploadshow.php?id=9
On the Titanium file link
It says The Last ATR reactivater for tit card (download)
Tiggy
how can i bee shure that my programmer is working in phoenix????been trying the software suggested and getting a error after cliking the reset sayng that the phoneix is not responding!!!!any software for that?????thanx
You wont sort out your Tit until you sort out your programmer. You might be bleaming the Tit when the problem is with your programmer.
Don't mind my spelling
yea!that wy i am asking if some one knows a way to test it!!!
i find it and test it!!!!is working fine!!!!!!!!!any eraser that i try fail to see the card giving a error sayng "no card".i guess there is nothing else to do with my tita card!is gone!
How many ATR's can a titanium card have at one time? The reason I ask is I ran the spanish ATR recovery tool, and now I have been erasing for hours and hours. I have ~20 different ATR's at virgin state(OS v.0, .4, .8), but still cant program anything onto the card nor change OS. Both the bananaloader and TMB editor can identify ATR, but only TMB can erase.
I'm using a smartmouse/phoenix programmer in phoenix mode and 3.58
Any tips are welcome...
Download Programmer 1.8.1 or 1.9.0 as these can be used to upgrade or downgrade the OS on the card.
Go for OS 103 if you can.
Don't mind my spelling
Sorry, no can do :^/. The 1.X.X programmers arent able to erase, get stuck on Trapping Card. And where is the option to upgrade/downgrade OS? And as long as the progger keeps finding new ATR's that need to be erased, I cant change OS. I've tried the OS Updater 2, without luck. I've tried the option in TMB to add ATR - without luckOriginally Posted by Razor
I'll just continue trying to erase all ATR's, but its soooo boring to push the same buttons thousands of times (having to wait for erase before pushing nmext time doesnt exactly help). Hope someone with similar experience or who actually knows how I can have so many different ATR's can help. Any and ALL tips are welcome!
sorry m8 ,but i am having same problem with 2 of my tita!!!cant erase,upgrade or downgrade the OS!they are dead!been trying many different softwares and followed many instructions but no luck!!anybody can help?????????????????????????????????????????????? ??????????????????????????????????
black prog. v105 for tit. could be tried, www. magictrance.nl go to the forum,its under tools and soft. for tit. card.
no luckkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk!! !!!!!!!!!!!!!!!!!!!
Originally Posted by guinness
Guinness, Are you in Ireland ? If so what part ?
Don't mind my spelling
nop m8!!!i am in uk!!!!i am not irish but i love guinness beer!!!so i gues nobady as recover a tita from the NO ATR problem!!!by the way,are u irish???
Originally Posted by guinness
Yes I am in Ireland, If you had of been here you could have brought your card over , and I would have put it through my setup.
Don't mind my spelling
I am facing the same problem with my Titanium card. I have a MasterCRD LCD2 and i have tried all the available files to restore it bt to no avail. Can someone help?Originally Posted by guinness
i think i have to order a new tita or one knotcard!!!i realy think we are weasting time trying to sort the NO ATR problem!!!i am really piss..........off about that!some people should have there finger chopped off for uploading killers files!!!still.............if some one got a solution let us know please!!!
hi everybody, i'm having the same problem. i can't erase,upgrade or downgrade the OS!
anybody have an idea? PLEASE!!!!
Was wondering if anyone had luck with the TMB editor. I loaded some killer files and now have no ATR. Will test TMB myself this evening when back home.
I Have The Same Problem, But What Is Dudez Or The Den.
Thanks.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks