A full MGcamd for AZbox HD!!! With info!

[gorski]

MGcamd is arguably the best Emulator! Works great!!!

But I couldn't get it to work as a CS SW. Because I made a silly mistake: I had the same line in my peer.cfg file and priority.list - X lines clashed. Removed it from my peer file and all works just fine in FW 1759!!!

Now, CS-wise I have:

Mbox for the latest Mbox servers
Incubus for CCcam server with 1 GBox server
MGcamd for 2 GBox servers [if I understood pr2 correctly, I removed a line which had the same IP]

I also added:

api = yes
wait = 15sec

to openxcas.conf, as suggested by pr2!

I am attaching to this message the full MGcamd from my AZbox HD, with an Autoroll file [thanx to RedBull's MGcamd key files] and all, just edit the details in your peer.cfg file as follows:

M: { myown.dyndns.org { mypassword}}
#
D: { mypeer's.dyndns.something { myport hisport { hispassword { A2 A2 }}}}
D: { mypeer's.dyndns.something { myport hisport { hispassword { A2 A2 }}}}

...then make the mgcamd folder in OpenXCAS folder, give it CHMOD rights to 755 and upload all these files into your AZbox HD and CHMOD 755 all the files -easy-peasy, hehe...

Just in case here is good Duden's intro:

This is how I got it to work with firmware 0.91605

Remember too backup all configs and other stuff before delete openxcas.

1. Delete OpenXCAS in the plugin menu. Reboot.
2. Download OpenXCAS from the plugin menu. Reoot.
4. Disable Multicas in the OpenXCAS "Activation and priority setting" menu.
3. Downloaded Mgcamd within the OpenXCAS plugin menu, "manual install"
4. FTP to the box and in EMU/OpenXCAS/mgcamd edit openxcas.conf and add the folllowing lines:

api = yes
wait = 15sec

(Thanks to pr2)

5. Then edit newcamd.list and enter your server configurations.
6. Activate mgcamd in OpenXCAS "Activation and priority setting" menu.
7. Reboot

Now you should have a running mgcamd. My experience is that every time you enter the plugin menu, you will have to restart mgcamd using yellow button in "Activation and priority setting".

I am runnig it local with Newcs 1.65 on a laptop with Ubuntu.

Njoy!


Attachment removed, no keys or bin files allowed. Admin

 

[siggikr]

Hi gorski.
I´ve tried this, but I only get a picture for a few seconds and then black screen.
can you send me your files ?
I´m using newcs server locally with *ds card.
I must have done something wrong, but that´s part of all this ist´t it ?
regards,
siggikr

 

[Motin]

Hi Gorski !

I am having som problems with AXBox amd mgcamd. Could you please help ?

 

[dig deep]

Use MultiCas, make sure You download the latest from the net.

 

[Motin]

I thought I was supposed to disable multicas and only run mgcamd ?!!... The server I am trying to connect to only allows mgcamd..

/Motin