MaksKied
New Member
- Joined
- Jun 6, 2020
- Messages
- 1
- Reaction score
- 0
- Points
- 1
- Age
- 66
- My Satellite Setup
- NC+ with card for Poland
- My Location
- Bedford, England UK
Hello,
We have a nc+ 2850 Receiver Decoder with a card for TV from Poland. This is connected to a LG TV 37LD490-ZB (2011) [Firmware latest 03.21.62] LG use the "Simplink" CEC system via the HDMI lead. This is for the father in-law, well into his 90's
However, the HDMI-CEC system does not takeover the TV picture when the Decoder box is powered on. Likewise, it will not takeover the TV picture when a (full ) Scart lead is used?
So the questions are :-
1) Is the nc+ Receiver/Decoder unit capable of sending a HDMI-CEC signal to the TV either by HDMI lead (proven lead) or the Scart Lead.
2) Is the LG TV capable of acting on a HDMI-CEC signal.
Also the menu setup on the nc+ Receiver/Decoder is all in Polish - which I don't understand - have tried using Google translate which is tricky.
Any tips, advise welcome.
We have a nc+ 2850 Receiver Decoder with a card for TV from Poland. This is connected to a LG TV 37LD490-ZB (2011) [Firmware latest 03.21.62] LG use the "Simplink" CEC system via the HDMI lead. This is for the father in-law, well into his 90's
However, the HDMI-CEC system does not takeover the TV picture when the Decoder box is powered on. Likewise, it will not takeover the TV picture when a (full ) Scart lead is used?
So the questions are :-
1) Is the nc+ Receiver/Decoder unit capable of sending a HDMI-CEC signal to the TV either by HDMI lead (proven lead) or the Scart Lead.
2) Is the LG TV capable of acting on a HDMI-CEC signal.
Also the menu setup on the nc+ Receiver/Decoder is all in Polish - which I don't understand - have tried using Google translate which is tricky.
Any tips, advise welcome.