Vipersan
Emmett Browns Ghost
- Joined
- Jun 29, 2009
- Messages
- 10,918
- Reaction score
- 6,663
- Points
- 113
- Age
- 66
- My Satellite Setup
-
IP9000HD +
TD110 Dish and TD88 Dish in Tandem
66°East to 60°West.
AZbox PrmHD + OpnbxS9HD + Skybox + DrHD F15
2x VboxII AZ-EL
2 m+ Alcoa PF + BSC421 C-Band lnbf...
+SS2/TwHnS2-3200 pci/TBS6925 pci
1.5 Fortec Star -Gbox - HtoH Ku/Ka/C
- My Location
- UK
Ok here is my final head end configuration..
Overkill you might say ..but that's what this hobby does to you ..
Left to right..
C band ..
Ka A Horizontal
Ka B and C overlapped Circular L/R or Linear H/V depending on the depolariser setting (Mechanical adjustment)
Ku Linear
Ka D single polarity H or V mechanical
Ka (part) A or B Verical or Ku (part) Circular or Ka (part) A or B Circular L or R
Problem ..
Only 6 IF lines ..and 7 needed ..
Hopefully the 13 / 18v switch from the usa ..ordered by my good friend Costa will solve this dilema..
rgds
VS
...not sure I can accomodate any more ...
Not even a waffer thin mint ...without exploding..
Overkill you might say ..but that's what this hobby does to you ..
Left to right..
C band ..
Ka A Horizontal
Ka B and C overlapped Circular L/R or Linear H/V depending on the depolariser setting (Mechanical adjustment)
Ku Linear
Ka D single polarity H or V mechanical
Ka (part) A or B Verical or Ku (part) Circular or Ka (part) A or B Circular L or R
Problem ..
Only 6 IF lines ..and 7 needed ..
Hopefully the 13 / 18v switch from the usa ..ordered by my good friend Costa will solve this dilema..
rgds
VS
...not sure I can accomodate any more ...
Not even a waffer thin mint ...without exploding..
Attachments
Last edited: