Reply to thread

Message: <blockquote data-quote="purplemarina" data-source="post: 940049" data-attributes="member: 327664"><p>Update: this weekend  put the new plastic cover on the feedhorn, the plastic is 0.5mm thick so i could cut it ok with large scissors hopefully it will last as its uv stabillised. the lnb holder i had was split (although it was glued) i replaced this with the good condition one i picked up from TJExcaliber in the week (thank you). the dish was covered in the usual blackstuff  spent a hour cleaning this! i found a crack in the edge which i repaired with 2 rivets and a strip of aluminium.[ATTACH]82924[/ATTACH] [ATTACH]82925[/ATTACH] sorry about the second picture i didnt notice it was blurred when i took it, the dish is now up the pole and its raining so wont take another. all fixing bolts changed to inox.</p></blockquote><p></p>