Sly UK NewCS / CCcam Config Creator

[anoble66]

hi everyone,

I am hoping someone might be able to help me before I pull all my hair out. I have tried everthing, but I cannot get my local card to share.

I can watch my sky sub card. In Newcam I can see the entitlements, and the newcam.xls looks good - used the utility. My Cccam.cfg also looks good. If I check the entitlements under CCcam info I dont see any. If I list the servers I see my newcamd server and its running and says 1 local card.

Any ideas why newcamd is not sending the entitlements to Cccam?

Thanks for any help

 

[B16MCC]

hi everyone,

I am hoping someone might be able to help me before I pull all my hair out. I have tried everthing, but I cannot get my local card to share.

I can watch my sky sub card. In Newcam I can see the entitlements, and the newcam.xls looks good - used the utility. My Cccam.cfg also looks good. If I check the entitlements under CCcam info I dont see any. If I list the servers I see my newcamd server and its running and says 1 local card.

Any ideas why newcamd is not sending the entitlements to Cccam?

Thanks for any help

I'm afraid this post doesn't make much sense. Your infomation is rather confused.

1. What card are you trying to share? is it the new white sly card ?
2. If so, you need to use NewCS and CCcam. Not newcamd !
3. Please check your information, software names, versions, file names, etc.
4. You won't see any entitlements in CCcam.
5. Please post again with some solid information.

Thanks...

 

[anoble66]

Thanks for getting back to me. I have taken a deep breath and I will try and make some sense this time The situation has changed since I last posted so let me explain.

1. I am reading the new sky card (963), I can watch channels locally fine.
2. I am using Nabliosat Blackhole 11G2 image
3. I running NewCS 1.66 & CCcam 2.1.1
4. I have my boxid coverted and entered into NewCS
5. I have a N: line in my CCcam.cfg
6. I can web into NewCS and see my card and entitlements
7. I can view CCcam info and view the servers I am connected too.

But - even though I have the F: lines in my Cccam.cfg I cannot see any clients and they cannot connect. I have port 12000 forward.

I just cannot figure out why I can see the servers but I do not see any clients. I am wondering in the nablio image there is a plugin called Nablio CCcam switcher. By default it points to Cccam-01.cfg

Could this be causing problems?

Thanks for any help

 

[anoble66]

ignore me, i am stupid. Forgot that my ip changed on the dm800....forgot to update the NAT rule on the firewall....all working now

 

[kazik]

Hi Guys

First of all I would like to thank everyone and especially B16MCC for all their informative and useful posts,greatly appreciated.
I have a Dreambox 7020 and have been using CCcam 2.1.2 with the blue card no problem,its still working well and entitlements have updated.
I now have the white card and using both serial numbers from the sky box and using the NDS Box Key Creator and the XP Scientific calculator I obtained the same boxkey.
Already having CCcam and Newcs 1.67 on my box I created my newCSconfig and N lines following the many examples in the forums,I have tried everything that people gave as examples ending with B16MCC sample file Newcs.xml and I still cant get any of the channels to clear.
I am not sure if it should work but using CCcam 2.1.2/NewCS 1.67 the blue card does clear anything also.
Its been weeks of late nights and now and I running out of steam,can anyone help !!!

 

[anoble66]

Hi Kazik,

CCcam 2.1.2 does not work with the white sky card. If you go to add-on and install CCcam 2.1.1 & NewCs 1.66 you should then be up and running. I have the same setup as you and mine is working.

cheers

 

[B16MCC]

anoble66, if the card is served with NewCS 1.66 / 1.67 then any version of CCcam will work ! There is nothing wrong with 2.1.2

 

[kazik]

Thanks for the info - before I read B16MCC post I tried CCcam 2.1.1/Newcs 1.66 but still no joy.
I have once again checked the newcs.xml and CCcam.config and found that I omitted the extra 1 4 at the end of the deskey line in my N line in
CCcam.config, could this be the problem as I cant check (away from home) at the moment?

 

[B16MCC]

yes definitely.

 

[techie]

Hi guys. Here's beta 4.1 of the CCCCC.

Change Log:-

1. Fixed a bug in the newcs.xml code when adding extra users.

Thanks to Sonic1 for finding it and reporting back.

NOTE:- Development has now started in Visual Studio 2008. This will mean further releases will be .NET Framework 3.5 compliant and will be fully packaged and Vista compatible. Please bare with me on this, its almost a full re-write.U-zzz

64bit vista reports Tabctl32.ocx missing

 

[techie]

what a great tool this is

as well as cccam support, would it be possible to add the creation of newcam.list file for mgcamd

also, would you mind if i copied this over to another forum, as this will help many people out

ive just gone to install it, and also get

Runtime Error 339

Component 'TABCTL32.OCX' or one of its dependancies not correctly registered: a file is missing or invalid

but after downloading the file from _http://www.ocxdump.com/download-ocx-files_new.php/ocxfiles/T/TABCTL32.OCX/6.01.9782/download.html into my windows/system32 folder its now working fine

didn't work for me :-(

Vista 64bit biz

 

[andel]

you could always try downloading it _http://www.ocxdump.com/download-ocx-files_new.php/ocxfiles/T/TABCTL32.OCX/6.01.9782/download.html

 

[B16MCC]

Guys this thread is well out of date now. Its been replaced by this one.

The Config Creator is now in V0.5.4 and is fully .NET 3.5 compliant. It now comes as a windows installer package and is Vista compatible.

You should always check the blog link in my signature for the latest versions of my software.

 

[techie]

sorry mate I now feel like homer "Dooh!".

And thanks for letting me know, cheers m8.

 

[B16MCC]

Guys, as mentioned this thread is continued here

And so this thread is closed.