Streaming from PC

[dig deep]

Download and install VLC RC1 1.0.0, Run it, go in Media, than select Streaming ( CTRL+S ), choose file from Your PC, go on tab called Network, and choose as Protocol RTP, in Address field put local IP address of Your AzBox HD, and You can leave port 1234.

NOTE: If You have SlyStar 2 or TV Tuner card on Your PC You can also stream material from that Source to Your AzBox HD ( This is very good if You have Security Camera, connected to Your PC, so You can always access it by IP Channel ).

In AzBox HD Settings, go on TV Channel, IP Channel, press ok in IP or Host field put local IP Address of Your PC , as port put 1234, and save it. ( Even if it show You fail to save channel or something else, do not worry, he saved it ). Now You have to go inside of Channel List, go on Satellites, and down there You will find 0.0 IP Channel, and press ok to enter in that folder and You will find Channel with name which You created in IP Channel option.
This option need latest FW and works very fine.

 

[britzolas]

Good evening to all,
I did exactly as you said. It show me fail to save channel. Then i went inside Channel List, on Satellites, and down there i didn't find 0.0 IP Channel. I tried it several times. What do i do wrong, can you help me please???

 

[dig deep]

You must have the latest FW for this function !

 

[britzolas]

You must have the latest FW for this function !

I have 09.2032. Is there a newer version???

 

[dig deep]

Nope, that the last one up till now

If You have set up the P channel in the box it should be seen in the sat list.

You must start by setting that option in the menu, settings.

 

[britzolas]

The problem is that i follow the instructions at the azbox and when i press save it says "fail to add an ip channel". I then go to the tv->satellites (besides the buttons all & genre) and there is not a thing besides my 2 satellites (astra & hotbird).
I tried to add my routers adress instead of my pc. It said channel created successful or something but at the satellites the same thing: Just the 2 satellites.
Are you sure it works? Have you tested it yourself???

 

[dig deep]

Yes I have it running in my box. Once it was setup it stayed in the sat section and I can stream whenever I want to.

 

[dig deep]

New firmware today !

Also check in router that You have port 1234 opened.