TRIAX 110 CM ANY GOOD

[simon 2003]

I have heard the brackets arent much cop

 

[Lazarus]

Tricky if you don't have three hands!

But as long as you support the weight of the dish at bottom dead centre, accurate adjustment of elevation is possible.

The same support method is needed when tightening off the slider, or it can twist a bit.

That said, the dish performs well.

 

[Archive-8]

They also can be very wobbly on some older h2h mounts.

As the post before said that are very good proformers.

 

[simon 2003]

thanks gents ,am i right in thinking its like a hirschmann type mount,where the bracket kind off pinches the back off the dish and you kind off slide to adjust or am i barking up wrong tree

be going on a technomate 3600 diseq (can never spell that ) motor

 

[Lazarus]

That's the chap.

Take care using a DiSEqC motor, though: I put mine up on an exposed wall and soon removed it and put it on a Patio Mount instead.

Apart from one incident where it fell over due to insufficient ballast, it has worked fine with a cheap motor for years.

 

[Journey]

Poor in my recent experience, although i have a theory that Triax name is being badged on lesser quality dishes

Would be better off with the slightly smaller Gibertini 1m dish, similar if not better gain than the Triax and far superior build quality and lighter

 

[Archive-8]

I had to buy a replacement dish. I bought a technomate dish to replace my triax. Well I found all the lnb clips ect fitted.

 

[simon 2003]

mmm mixed veiws then wanted an aluminium type to cut down weight an 110 is biggest i can go ,think i had an old lenson heath 110cm 15 yrs ago good dish
anyone know how many companys produce 110's

 

[gibertini]

the orbital ali dish is 109cm by 99cm and is a good performer/easy to set up... if you cant go to a 1.2m/polar mount set up then a gibby is a cracking dish that performs well. most 110cm dishes are about 105cm as they always measure the top to bottom. famaval do a 119cm x 110cm but there not the best performers/quality. the td110 is a good performer that will last years but for me the gibby wins with the orbital a close second for dishes to be used on a usals motor.