44 replies to this topic

[heart1lover]

hello frineds
i need the crow receiver software so plz help me out
i hope some one help as soon as possible
thanks

[same_44]

this is working crow software:)

[abusalah]

hi,

did you get the crow software??

[tahirmahmoodhasan]

Hi
Did you get the software for the crow receiver. Please guide us also how to load in to our receiver step by step.
Thanks

[tahirmahmoodhasan]

no details are there please provide the web address and steps to download.
thanks

[khawaja88]

Hi
Did you get the software for the crow receiver. Please guide us also how to load in to our receiver step by step.
Thanks

[Analoguesat]

There is absolutely no point asking the same question over and over. Most of our members are based in Europe and I very much doubt that particular make is available here.

WAIT and hope someone from the Middle East can help you - although it might take a few weeks

[same_44]

Hy i have crow new software working from 01-03-2010 if any one want software please email me for get software i send by mail my email is [Moderator] Email removed.

Edited by satelliteman, 02 March 2010 - 07:18 AM.

[bvipbos]

hi ,i am new user,i need the crowIIstd-200 receiver software so plz help me .and step by step.what i do with new reciver.and what is master and slave.some one say ,if u add new softwear ,ur reciver will dead.plz help me soon

[shariq]

pls send softwere

[Digital2]

Here is how to upgrade THE CROW (For NSS; If ur dish/LNB is in the direction of Asiasat3S):-
1. Connect THE CROW to your computer through RS232 cable.
2. Set the switch at the back panel of your receiver to A.
3.Start the upgrade software(Upgrade.exe)
4.Click connect
5.A list will load on the screen of the upgrade software; click on Maincode/Chunk (probably the third option)
6.Browse to the software (BIN file); currently 19.Feb.2010 working.
7.Turn off ur receiver and turn it back on, the upgrade will start.Wait till you get the UPGRADE SUCCESS on your screen.
8.Disconnect the receiver from your computer and set the (A-N-B)switch back to N position
9.Connect to your TV and let the receiver on any encrypted channel (I prefer Jazeera sports on Nilesat).Once the channel shows up, you are done!
REMEMBER:
1. Use NSS software if your dish/LNB is in the Asiasat direction and W6 if you're using the other direction.
2. Put the A-N-B switch to A position while you are upgrading and back to N position when the upgrade is complete.
3. Make sure the DONGLE is present in your receiver and not already removed for separate sale (as currently being done by some cheats!)
P.S. The rules of this forum do not permit the uploading of BIN files so I cannot do that. You can find them by perfoming a 'search'

Good Luck

%2$s attachment removed as it contains a bin file which is against the rules and not permitted on the forum, I suggest you upload to a file server somewhere and post a non active link if you wish to make this available to others

[Digital2]

The software(bin file) and the loader uploaded, thanx to the suggestion from the Admin ;)Get it from :-
h**p://rapidshare.com/files/361706953/The_Crow_Software.rar.html

[bibo66]

please can you send me the software for the crow receiver,
regards

[Analoguesat]

The software is available in post 12!

[bibo66]

it's not there I've checked that page but it's showing this message: "This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times. This limit is reached"

can you help please

[jason_1124]

Thanks mate!!! It will be a lot of help!!

Here is how to upgrade THE CROW (For NSS; If ur dish/LNB is in the direction of Asiasat3S):-
1. Connect THE CROW to your computer through RS232 cable.
2. Set the switch at the back panel of your receiver to A.
3.Start the upgrade software(Upgrade.exe)
4.Click connect
5.A list will load on the screen of the upgrade software; click on Maincode/Chunk (probably the third option)
6.Browse to the software (BIN file); currently 19.Feb.2010 working.
7.Turn off ur receiver and turn it back on, the upgrade will start.Wait till you get the UPGRADE SUCCESS on your screen.
8.Disconnect the receiver from your computer and set the (A-N-B)switch back to N position
9.Connect to your TV and let the receiver on any encrypted channel (I prefer Jazeera sports on Nilesat).Once the channel shows up, you are done!
REMEMBER:
1. Use NSS software if your dish/LNB is in the Asiasat direction and W6 if you're using the other direction.
2. Put the A-N-B switch to A position while you are upgrading and back to N position when the upgrade is complete.
3. Make sure the DONGLE is present in your receiver and not already removed for separate sale (as currently being done by some cheats!)
P.S. The rules of this forum do not permit the uploading of BIN files so I cannot do that. You can find them by perfoming a 'search'

Good Luck

%2$s attachment removed as it contains a bin file which is against the rules and not permitted on the forum, I suggest you upload to a file server somewhere and post a non active link if you wish to make this available to others

[same_44]

tomorrow 2nd aprial 2010 i get software for crow and dreemer receiver i am working for satellite shop so when software finish with in 24hrs i am get softwear but how i can give u that software tell me so i send u other wisw u can request theough my mail

[waleed2cool]

Hello every 1,Yesterday i went to a shop to upgrade my crow receiver in k.s.a,the guy said we donot upgrade the software any more,u have to buy a 250 SR dongil(usb) which will enable the channel.

Any one have explantion on this ....?

And if we still can upgrade the software ,kindly paste a link for the software for asia sat

[jason_1124]

Hi, guys! Im from the kingdom also, I have a crow receiver and I have also the same problem. New DONGLE worth 250sr!!! Ridiculous!! I dont know if I should trust the guys from the shop right now....Someone out there, can you pls. help us. Should I swap my CROW to new receiver?

[arifram]

Hi,, i also bought new crow 2 receiver last month. Before this i can browse all the channel that have lock.
But now all channel i cant open it. should i upgrade or update the receiver. My receiver also got doggle at back.

regards

[sherazathar]

Dear Friends
I need the latest software update for Crow Receiver. Pleassssssssssssssssssssssse help. From where I can download ir

[arifram]

This is link is not available. Any other link?...

[arifram]

Any new link for update crow 2 receiver......... plzzzzz help me

[shaain]

plz send me software my email is [Moderation] Email Removed

Edited by satelliteman, 25 April 2010 - 02:39 PM.

[waleed2cool]

Hi, guys! Im from the kingdom also, I have a crow receiver and I have also the same problem. New DONGLE worth 250sr!!! Ridiculous!! I dont know if I should trust the guys from the shop right now....Someone out there, can you pls. help us. Should I swap my CROW to new receiver?

Well after waiting for 2 weeks i finally decided to buy the dongel it cost me 150 riyals and all of my channels are working. dongel is basically a memory chip which is installed at the back side of crow reciver,which already installed in crow 2.

Now about the software we have to update it as it was required before for 10 SR,or you can update it buy urself,i have never upgraded the softare by my self,i tried but i cud not find the software online so instead of taking risk i prefer to pay.

[jason_1124]

Well after waiting for 2 weeks i finally decided to buy the dongel it cost me 150 riyals and all of my channels are working. dongel is basically a memory chip which is installed at the back side of crow reciver,which already installed in crow 2.

Now about the software we have to update it as it was required before for 10 SR,or you can update it buy urself,i have never upgraded the softare by my self,i tried but i cud not find the software online so instead of taking risk i prefer to pay.

Its been nice to hear that still someone using crow receiver. My friends dumped their crow and buy Crow2/Drummer2. Me, I will stick to my crow and wait. Here in Khamis, Dongle is still worth 200sr:confused: upgrade cost 30-50sr:eek: Im thinking I will upgrade it by myself. By the way, crow now has 2 dongle one inside and another one at the back.. Is that right??

[arifram]

Yes it is good news from you... Mr Waleed. congratulation....

Thats mean Im also should buy the new dongle. How about dongel that already installed at the back.? Thats mean we must replace it or what.


Tq.

[jason_1124]

@arifram, if your using crow2 you dont need to replace the dongle at the back.

[saifoor]

Crow drummer & hawk new firmware

Receiver firmware files removed - such material is strictly forbidden on this forum - admin

[arifram]

@arifram, if your using crow2 you dont need to replace the dongle at the back.

Yes Mr Jason, my problem is solved right now. Well after waiting for 3 weeks i finally decided to go to the shoop and ask to update my doggle. It is cost SR50.

Now i can open all the channel .