dfdream

All,

I am adding a Jaeger 1224 motor to my channel master 1.2m dish.
Does anyone have any detailed instructions on the installation and the configuration of the dish.

The questions I also have is .
1: the brackets for the offset dish that comes with the motor have a slot in them. Do I move the bolts in the slots to align the dish or do I move the plate thats ontop of the motor.

See on this page, its the plate on top of the motor

_www.satcure.co.uk/tech/1224.htm
This plate (according to the instructions) is connected to the offset dish brackets and these are connected to the channel master adaptor plate.

See offset section on this link

_http://www.satellitesuperstore.com/motors.htm

Thanks

D