The exact spec is below.
It seems to work intermittantly?
Any way of checking the old one out?
The Moteck seems to get a good following here?
Motor Geo-Track H120
FEATURE LIST Protocol: DiSEqC 1.2
Compatible Receiver: Receiver with DiSEqC 1.2 or Interface Box
Antenna Size: 120cm max.
Speed: 1,9° / sec (at 13V); 2,5° / sec (at 18V)
Azimuth Angle: 80° East ~ 80° West (160°)
Elevation Angle: 25~75°
Input Voltage: 13/18Vdc
Output Voltage: 13/18Vdc
Power Consumption: 50mA (Standby), 200mA (Normal), 350mA (Max.)
Satellite Positions: 60
Calibration Function: Yes (Go to 0°)
Manual East/West Buttons: Yes (build-in on the bottom of the mount)
Limit Protection:
1. Fixed type with micro switches
2.Programmable Software Limit
3. Current Limit
Positioning Sensor: High Resolution Hall Effect Sensor
Connector: F-type
Weight: 3,1Kg / 3,5Kg (Gross)
Dimension (Mount): 345 x 168 x 110mm³ (Gross)
__________________
The best way to learn is from your mistakes... Sorry I made a mistake!... The best way to learn is from others mistakes.
_www.Nottstalgia.com
The Nottingham Forums |