also make sure your wall mount is 100% level otherwise you will have issues when tracking the arc east/west
yes use either 1west or 5west to align up once you have correctly entered your location coordinates in the usals menu on the receiver.
on the dish elevation i found on my dish the marking wasn't correct so just start from figure given in the motor manual and tweak it from there for best signal.
Originally Posted by dogs I think my elevation should be 26 deg as a few sites for the co-ordinates say 25.89 - 26.14 but on my tm-2200 it has an Elevation marker on it and an latitude marker on the bracket...but when i set the latitude to 56 the elevation marker is at 34...did i miss something. |
no this is correct some motors have both so just set it to 56 as the other side just tells you what it is in degrees thats all
Originally Posted by dogs So if i get thor sorted in theory using USALS i should be able to choose another satellite say 19e and the dish should track to that satellite providing i have my initial satellite setup right? |
yes once you have got the alignment to the reference satellite correct everything else will be found