Originally Posted by adamrick  Hi Guys,
I have a DM7000S using cccam2.0.9/NewCS 1.60 I have an original irdet2 smartcard from my provider and want to use it in the smartcard slots of the Dreambox...
I tried installing Scam 1.39a via the blue panel download to make the two smartcard slots activate, but this didn't seem to work....
I added this line to cccam.cfg but it didn't work:
CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00
CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/sci0
SMARTCARD CLOCK FREQUENCY: /dev/sci0 7800000
SMARTCARD WRITE DELAY: /dev/sci0 100
Can someone please tell me how to activate the slots?
Can someone tell me which is slot 0 (the top one or the bottom one)?
Many thanks in advance! |
In the 7000S there is a card reader which can be used with CCcam 2.0.9 (use with chip side at bottom) and another one for CI CAM which works with Common Interface (Blue Botton) , but with chip on top.
To see you card work, insert an Irdeto CAM into the CI CAM Slot, and it should enable you to watch the channels that you have subscribed to.
If it doesn't work, ask your provider for the PIN number, but most providers don't do this ASAIK.
I think that you can use just CCcam without the lines that you added.
I suggest that you delete CCcam and then reinstall it again.