Originally Posted by satelliteman

Morning, somehow, I've been waiting for this thread, lol.....

Take these easy steps and it will work.

> Get yourself a compass
> Point the dish to a rough 143°
> Set the dish elevation to a rough 24º although this may not be accurate on the bracket
> Stand in front the dish looking at it and turn the LNb a fraction so the F connector is at a 7'0Clock position.
> Use and in-line meter and move the dish in small movements until it peaks
> OR use the receiver to align the dish by signal screen ( use Tp 10.714h)
> If you find a signal on the meter, scan this Tp 10.714h, 22000, 5/6 (Channel 4)
> If you scan this transponder and get the above.... your on 28E.

SM