Originally Posted by mick2me  I just set the left hand dish scale to 22.5
As I am working 2-10, I will do the rest tomorrow.
I assume I leav the dish at 22.5 and set any vertical adjustment on the Motor scale? |
Assume you have read the guides, I think your getting confused
> Set the motor to your Latitude of 52.5
> Place the dish on the centre of the motor shaft
> Start off with the dish slightly up from vertical
> Enter co-ordinates into receiver
> Send the dish to Thor in usals menu or select the 1W from the sat list
> Adjust the
motor around the pole and
raise or lower the dish elevation until you have a lock on Thor
> Lock up nuts and drive motor to 42e and 30w and check
> Job complete
SM