yes it works with the power button thx!
but this repluging problem i have also,very strange,often it happens that the image complity crashed,and box boots new,after changing the ip and save,after install ccam now it is imposible to access over ftp standart ip 192.168.0.6
on smart ftp i got this error
Connecting to 192.168.0.6 Port: 21
[10:59:27] No connection could be made because the target machine actively refused it.
[10:59:27] Client closed the connection.
webiterface access over browser,since that also not working,very strange,maybe i have now a difrent port,but where i find this information?
maybe port 21 is wrong,i copy settings lists in etc folder,and download from bluepanel ccam 2.0.9 since that it refused the conection!
when i conect over hdmi i have only violett and green picture together,no real colors cables are okay,maybe its a problem ,because my dell 24" does not support the copright bitflag
testet this with orginal image before i change the gimini!
all menüs are very slow,and it takes a lot of time when i save something,sounds like that the ram on dm 800 limited
with new revision i have no over heating problems now,tuner is i would say "very " cold,on old dm 800 was much hoter
no i must find other way,to flash image when ftp and browser acces stop working without any reason!
before i fashed with browser interface. i tryed to flash with dreamup,but i got no conection after serval attemts!
i do not have make any change,on my pc,logging in to dm 500 with same data works fine ,but dm 800 blocks now everything??
use iterface is on dhcp is off,when i would change this,all other fields disapears in menu!
i coped latest motor settings form the net with satelite xml to the /etc folder,but currencly i only see the satelites but not the channellist itselfs!
thanx for your always fast answers