Which image version did you use and what was there before?
What happened after the reflash?
Did you scan the satellite and which one?
As you have a motorized system, perhaps you have too many channels in the channels list which is using up memory.
Why did you leave it overnight?
I suggest to check if your image is from a reliable source and is not corrupted and reflash again.
I usually disconnect all cables from the box (including the LNB coax) and leave ONLY the power cord and the null modem cable.
Shutdown PC and box and then connect the other end of the null modem cable to the PC and switch on the PC ONLY.
Then open DreamUP and follow instructions to the letter.
After reflash, disconnect the power cord wait few minutes and then disconnect the null modem cable and connect all the cables they were connected before. |