Thread: Dreambox 500 - JTAG Information
View Single Post
Old 29-07-2009   #186
Llew
cerca trova...
 
Llew's Avatar
 
Join Date: 01-01-2000
Location: East Anglia
Posts: 6255
Thanks: 37
Thanked 412 Times in 375 Posts
Blog Entries: 1

My System: Triple Dragon with HDD/USB stick, Dreambox 8000, Humax HDCI2000, Echostar AD3000ip & SR8700, Aston Simba, RSD ODM300. Swedish Microwave 1.2 Motorised dish / Invacom C120 twin LNB driven by the AD3000. 3 other fixed dishes.


Fighting the evil 3 Dragons under the Don Quixote banner,Sir Llew persevered where others failed
permalink
Originally Posted by qaka View Post
dears

about cable jtag
i want to know we use 100 ohm or 33 ohm for resistrance and we connect it to pin 11 or pin 13 this is my fist quistion and other i we make short from pin 18 to 25 or not only direct connect cable to pin 25

with my best wishes
100 Ohms. They go to pins 1,3,5,7,9 and 11 on the DB's pins.

Pin 25 is the actual ground connection of the printer port connector. You solder 18 -25 together to maintain a good ground condition through the printer cable.

Llew
Celebrating Ten Years Of The Forum As A Founder Member
Llew is offline   Reply With Quote