Channel Hopper

Assuming its not the crusty bed linen making the noise

1) check you dont have any problems from a similar soursce on the same transponder (eg 2M Maroc). If so go to 3)

2) Check the receiver has loaded the correct audio PID from the bouquet, Ary has decimal value 651 (hex is 28B). Correct if wrong in the manual advanced install section of the menu, then go to 3).

3) Delete the transponder completely , switch off and on, and re install

4) Edit the Audio PID up or down by one or two digits to see if the MPEG filter is collecting all the available information from the stream.

There is a very fine line between "hobby" and "mental illness"