astra 19 germany help | |
 |
| | Thread Tools | Display Modes |
| |
| |||||||
2 Weeks Ago
| #1 | ||
| Member Join Date: 03-06-2008 Location: Australian in Germany
Posts: 2
Thanks: 2
Thanked 0 Times in 0 Posts
My System: no dish yet. st2 satelitte meter (rover) |
Hi all Just relocated and old working dish pointing at astra. What readings should i be getting for the best possible signal. I have a ST2 meter. I have never aligned a dish with analouge signal. There are two cables 1st 950+ 2nd 1250? feeding to a spliter. Just finished reading the manual and i will try the sat finder and go from there. Sorry for my lack of knowledge on this. Any help appreciated | ||
|  |
|
2 Weeks Ago
| #2 | ||
| Information Exec  Join Date: 07-05-2007 Location: Midlands (UK) & Lanzarote (Canary Islands)
Posts: 1064
Thanks: 1
Thanked 129 Times in 127 Posts
My System: 43cm Dish, Sky Plus, FRACARRO PENTA 85, Invacom Twin, Moteck SG2100a H-H DiSEqC Motor, TF5000CI, TM-5200D, Rover Discovery ST-4, Rover SDM-1s, 57E to 58W | Welcome to the forum, It's the same as the ST-4 but without then TFT screen. This meter will show a PAL signal trace along with the DVB-S multiplexes. Select Horizontal Polarisation and Low Band (H/Low) (18V / No 22Khz Tone), switch to spectrum trace mode. Find the rough angles from dishpointer.com and align the dish until you see the following: First Analogue peak on 10.714H followed after by two DVB-S transponders 10.744H and 10.773H and then another PAL transponder 10.803H Hope this helps. SatMan  | ||
|
| |
| The Following User Says Thank You to satelliteman For This Useful Post: | tychi99 (2 Weeks Ago) |
|
2 Weeks Ago
| #3 | ||
| Information Exec Join Date: 07-05-2007 Location: Midlands (UK) & Lanzarote (Canary Islands)
Posts: 1064
Thanks: 1
Thanked 129 Times in 127 Posts
My System: 43cm Dish, Sky Plus, FRACARRO PENTA 85, Invacom Twin, Moteck SG2100a H-H DiSEqC Motor, TF5000CI, TM-5200D, Rover Discovery ST-4, Rover SDM-1s, 57E to 58W | 65 - 75dBuV CNR / Carrier to Noise 15dB | ||
|
| |
| The Following User Says Thank You to satelliteman For This Useful Post: | tychi99 (2 Weeks Ago) |
Linear Mode
