Videoguard. Any cams available?


Reply
 
Thread Tools Display Modes
Old 23-09-2008   #1
Member
 
canvey's Avatar
 
Join Date: 14-08-2008
Location: Next Door
Posts: 18
Thanks: 15
Thanked 0 Times in 0 Posts

My System: MVision HD Receiver. Motorised Dish
Videoguard. Any cams available?

Hi guys just following on from a previous thread.
Having only recently got into the satellite experience I am amazed with some of the HD content out there. Melodyzen. WOW. As I understand it channel 4 are transmitting in HD but it uses the Videoguard Encryption. The Free Sat card from sky lists C4 HD as a channel that is available. Now to watch this channel through my current receiver is there any cams that actually decode the videogaurd encryption? Then I could just pop the card in. Or maybe another option would be to get a dual LNB and to run a Sky box from it and put the card in that. Then im thinking as its not a HD box then I wouldnt be able to see C4 HD. Shall I just give up whilst im ahead or be thinking that its going to be putting a big hole in my pocket. C4 seem to be showing quite a few films in the evening as im not aware of any FTA HD channels that do unless I speak German or French.
canvey is offline   Reply With Quote
Old 23-09-2008   #2
Super Moderator
 
Robbo's Avatar
 
Join Date: 17-05-2007
Location: Kent,UK
Posts: 2964
Thanks: 44
Thanked 391 Times in 378 Posts

My System: TM6800HD+TD110+StabHH90 motor,TM1000D+Orbital 1m Multifeed 16E,23E,28E.DigitAlB movies. A Bigsat BS-S77CX and a Sky Dodgibox.

Your receiver, when patched , may allow a Sky card to be used. The MVision ST-5 does apparently. You would still need a Sky box though to keep the card alive.
Robbo is online now   Reply With Quote
The Following User Says Thank You to Robbo For This Useful Post:
canvey (23-09-2008)
Old 23-09-2008   #3
JTA
Specialist Contributor
 
JTA's Avatar
 
Join Date: 16-03-2005
Location: Belgium
Posts: 461
Thanks: 1
Thanked 10 Times in 8 Posts

My System: Dreambox with PLi-Emerald 1.09 image, Matrix revolution CAS, newcamd emu, movable dish 0.85 m, very happy indeed

Originally Posted by canvey View Post
Then im thinking as its not a HD box then I wouldnt be able to see C4 HD
you need a HD receiver to watch HD channels. HD is mpeg4, not mpeg2, and most transponders are DVB-S2, not DVB-S, so your (non-HD) receiver won't even be able to locate those frequencies.
JTA is offline   Reply With Quote
Old 23-09-2008   #4
Super Moderator
 
Robbo's Avatar
 
Join Date: 17-05-2007
Location: Kent,UK
Posts: 2964
Thanks: 44
Thanked 391 Times in 378 Posts

My System: TM6800HD+TD110+StabHH90 motor,TM1000D+Orbital 1m Multifeed 16E,23E,28E.DigitAlB movies. A Bigsat BS-S77CX and a Sky Dodgibox.

Originally Posted by JTA View Post
you need a HD receiver to watch HD channels. HD is mpeg4, not mpeg2, and most transponders are DVB-S2, not DVB-S, so your (non-HD) receiver won't even be able to locate those frequencies.
He has a HD box, an MVision according to his profile.

Just the Sky box that he has, that isn't.
Robbo is online now   Reply With Quote
Old 23-09-2008   #5
Member
 
canvey's Avatar
 
Join Date: 14-08-2008
Location: Next Door
Posts: 18
Thanks: 15
Thanked 0 Times in 0 Posts

My System: MVision HD Receiver. Motorised Dish

Hi and thanks for your replies.
Ye my receiver is an HD Box, hence able to watch the FTA HD channels. I have used GXMax.com before to patch my receiver. Im never really sure as to what its actually doing to my receiver though. It seems to wipe everything out back to factory settings once patched. But then it says its been updated. Any other ideas of sites to patch an Mvision HD 200 Combo?? Do the sites actually tell you what your uploading to your box. As kindly answered in a previous thread I was told that a Diablo/T Rex Cam may decode a Videoguard encryption although when researched it doesnt actually tell you that. Looks like I may have to buy a Sky HD box from somewhere and then maybe the Free Sat from Sky card. All to watch C4 HD. Perhaps I will give it a miss. Unless someone out there has done it. Ta
canvey is offline   Reply With Quote
Old 23-09-2008   #6
Super Moderator
 
Robbo's Avatar
 
Join Date: 17-05-2007
Location: Kent,UK
Posts: 2964
Thanks: 44
Thanked 391 Times in 378 Posts

My System: TM6800HD+TD110+StabHH90 motor,TM1000D+Orbital 1m Multifeed 16E,23E,28E.DigitAlB movies. A Bigsat BS-S77CX and a Sky Dodgibox.

It depends on what the patchmakers put into them. For my receiver the patch did get me Ch4 HD via the Sky card. Have you tried the latest patch for your receiver? Have you tried a Sky card in it?

If you google you should be able to get the latest software, gxmax.com for example.

A Sky HD box I would have thought, would cost more than an a Diablo or TREX with a programmer. There are plenty of posts on the forum with people using those CAMs for Sky subscription cards and FresatfromSky cards.

Last edited by Robbo; 23-09-2008 at 11:29 PM
Robbo is online now   Reply With Quote
The Following 2 Users Say Thank You to Robbo For This Useful Post:
canvey (24-09-2008), stryker88 (3 Weeks Ago)
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off
Forum Jump






All times are GMT +1. The time now is 05:57 PM.


All views and information expressed in users' communications and profiles represent the opinions of the users concerned and do not represent the views of Satellites.co.uk. All images and news content are believed to be in the public domain, except where otherwise stated. Forum software by vBulletin® Version 3.7.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.


Content Relevant URLs by vBSEO 3.2.0