Blue Zeta cam

**tall_paul** · 28-06-2005

Hi
I have just bought a blue zeta cam full-x 1,2 and put it into spare slot of my Force 1122s but nothing happens? I have gone into the menu and it does not appear in the access control. I have taken it out replaced both my MR and Aston cam which do come up in the menu but still no response. I have also looked int the package menu and it says Norden, Canal Digital, Conax is this correct?

**jimbo** · 28-06-2005

It should show in the CI menu as neotion I believe.

**tall_paul** · 28-06-2005

What do I do when it doesn't show what it is suppose to?

***sonic1*** · 28-06-2005

Can you try it in another or a mates stb?
If not do you have a cas2 or 3 ?

**jimbo** · 29-06-2005

Originally Posted by tall_paul

What do I do when it doesn't show what it is suppose to?

Also any possibility of speaking to your supplier? I purchased one ages ago to play with and it worked fine in my old Echostar 3000. Tried it tonight and it's ok in the Manhattan.

**tall_paul** · 29-06-2005

Hi

Have spoken to supplier and he suggests same. Try it another reciever, if it does not work I can send it back for a new one. Yes I have cas2 with addon. What do I do with the cas2?? Cheers.

**Llew** · 29-06-2005

You need to use the J-Card that comes with the CAS2.

Place the J-Card in the cam first, insert the cam into the CAS, and the J-Card cable into the external connector of the CAS.

'Joker Connected' (same as Zeta Cam) shows in the CAS Menu. (Make sure the J-Card is inserted correctly in the CAM).

Follow instructions in the Menu (i.e. open your file , select and program).

Llew

**tall_paul** · 29-06-2005

Originally Posted by Llew

You need to use the J-Card that comes with the CAS2.

Place the J-Card in the cam first, insert the cam into the CAS, and the J-Card cable into the external connector of the CAS.

'Joker Connected' (same as Zeta Cam) shows in the CAS Menu. (Make sure the J-Card is inserted correctly in the CAM).

Follow instructions in the Menu (i.e. open your file , select and program).

Llew

Cheers Llew

Only one problem, I think I must have got stiffed. I didn't get J-Card with my CAS2. Can I not just put the cam in the cas2? Does this not achieve the same result? Do I also read you correctly in that the blue zeta cam is the same as a joker cam? Many Thanks.

**jimbo** · 29-06-2005

I think the CAS2 is sold on it's own (cheaper) or as part of a deluxe pack (dearer) with jtag and dummy board. Maybe you have the first one I mentioned. I must admit I don't like those jtag thingys because with the CAS1 it was suggested 'wobbling' it in the cam to get a connection. So I wobbled it and blew a diode. Were Duolabs interested, yeah right.

Anyway apart from all that you shouldn't need to program the cam if it's been programmed by your supplier. Full x is for life I believe. Try it in another box.

***sonic1*** · 29-06-2005

Hi tall_paul!
Yes blue zeta is a joker or merlin or blue ice ect.
You will need the j-tag to programme it if it is the cam that is at fault.
you will then need the cas2 file followed by Kamilz 112c fun5 file.
Both are readily available should you need them.

This what the j-tag should look like!

**tall_paul** · 08-07-2005

Hi sonic1

Cam not faulty as I have tried it in a friends receiver and it works. Got it back today and the bloody thing still doesn't in my Force 1122s. Anybody got any idea's?

Originally Posted by sonic1

Hi tall_paul!
Yes blue zeta is a joker or merlin or blue ice ect.
You will need the j-tag to programme it if it is the cam that is at fault.
you will then need the cas2 file followed by Kamilz 112c fun5 file.
Both are readily available should you need them.

This what the j-tag should look like!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
any hope for ma useless Irdeto CAM yet	sat_freak	Irdeto system	7	10-05-2006 04:32 PM
diablo cam	wolfav	Cams and decoders General	0	08-05-2006 04:28 PM
Matrix Reloaded How To by AHAC	rolfw	Matrix Reloaded, Revolutions and CAS interface	52	27-12-2005 12:02 PM
ice crypt blue CAM	khatm	Cams and decoders General	4	30-08-2003 12:15 AM
Axas Cam and Dreamload	jderby	Cams and decoders General	2	28-08-2003 05:52 PM

Blue Zeta cam CAMs, built-in CAMs, Common-Interface CAMs... Add-on decoders.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)