ROM110 AC3 unlooper help?

caketin · 01-06-2007

Hi

I know this is an international Portuguese forum,but I am looking for expert help.
I have a rom 110 ac3 card.
I have been using rom110 studio v1.6
I am trying to set up my unlooper to glitch into the card.
I have used a resistance of 2.2k on the variable resistor unlooper and PSU at 9v but the response was bad.
The response was nothing like the one given in the rom110 studio document.
I tried to set up the resistor,and found 50ohms to give a good response.
Would it be better to leave the variable resistor at 2.2k and adjust the vcc start and vcc limit in the configuration menu?
Sorry for the post being in English.
Babelfish translator very bad in your language.
Theres not much point in me making a post in the English forums either.
I cant see many English posts in regards to mosc rom110 ac3.
Any help would be appreciated.

caketin

skybandit · 18-03-2008

Im assuming you are using a powersync unlooper. 2.2k ohms was used for the hu cards way back when dtv was hacked. try setting your pot between 180-220 ohms and you may find you have better results. Good luck!
ooops! just noticed the date of your post, guess im a little late...lol

rejao · 06-07-2008

ola amigos como emcontra rom110 studio v1.6 ñ acho

**john_graydon** · 08-07-2008

Originally Posted by caketin

Hi

I know this is an international Portuguese forum,but I am looking for expert help.
I have a rom 110 ac3 card.
I have been using rom110 studio v1.6
I am trying to set up my unlooper to glitch into the card.
I have used a resistance of 2.2k on the variable resistor unlooper and PSU at 9v but the response was bad.
The response was nothing like the one given in the rom110 studio document.
I tried to set up the resistor,and found 50ohms to give a good response.
Would it be better to leave the variable resistor at 2.2k and adjust the vcc start and vcc limit in the configuration menu?
Sorry for the post being in English.
Babelfish translator very bad in your language.
Theres not much point in me making a post in the English forums either.
I cant see many English posts in regards to mosc rom110 ac3.
Any help would be appreciated.

caketin

You will need to flash your glitcher with newdrs. You will need rom 110ac3 script. 4619 chips installed on your glitcher. Make sure you dump your script 1st.

Você precisará de piscar seu glitcher com newdrs. Você precisará o certificado da ROM 110ac3. 4619 microplaquetas instaladas em seu glitcher. Certifique-se que você despeja seu certificado ø.

skybandit · 10-07-2008

John_graydon
trying to pm you but i dont have a reply option in my pm box.

**Topper** · 10-07-2008

Originally Posted by skybandit

John_graydon
trying to pm you but i dont have a reply option in my pm box.

Sorry PM privileges are not available to new members you will have to post your question provided it is within the rules which I am sure you read

skybandit · 12-07-2008

Originally Posted by Topper

Sorry PM privileges are not available to new members you will have to post your question provided it is within the rules which I am sure you read

i was just trying to reply to his pm.. no worries

fatbunny · 24-07-2008

Originally Posted by john_graydon

You will need to flash your glitcher with newdrs. You will need rom 110ac3 script. 4619 chips installed on your glitcher. Make sure you dump your script 1st.

Você precisará de piscar seu glitcher com newdrs. Você precisará o certificado da ROM 110ac3. 4619 microplaquetas instaladas em seu glitcher. Certifique-se que você despeja seu certificado ø.

Can this be done with a powersync? Is there a script for ac3 or do I need to use the romstudio program? Not sure what you mean by dump your script?

Sorry for the noobish questions, hope I'm not outta line either.

**Topper** · 24-07-2008

Thread moved from Portuguese section

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)