zeus programmer help

apf666

ok this is my last ditch effort to program a funcard 6 with a zeus that i have had for a while, if no joy i will get a adtek multi , just had a bit of time to kill and dusted it off

have posted before elsewhere but not many people seem to have the zeus

trying to use cardwriter 2.08

keeps asking me to change to amtel mode 4

comes up with sync errors also

can anyone point me in the right direction to a good idiots guide or indeed offer any advice at all

green led working
red led lights up and goes when trying to read

any advice on how to write

cheers

rolfw

Have a look at www.duwgati.com, there are some tutorials on the different card writing packages.

Rolf If you enjoy our site, you can help support it by wearing our unique branded merchandise, you can do this by clicking on my baseball cap, making a direct donation with Paypal by clicking on the Donation button below, or using our site supporting advertisers, to do this, click on the central image below. Follow us on Twitter, click on the twitter image.

apf666

seen that thanks, also looking for advice re jumper placement, settings etc, changing modes

thanks for the reply

FlyBoy

Make sure that you are using a 12v to 18v UNstabilised power supply.

As for instructions they can be found here:http://pictronix.8bit.co.uk/info/zeus.htm

Cheers

FlyBoy

apf666

tried again.


keeps asking to switch programmer to amtel mode then comes up with sync errors?

think the zeus is goosed