No signs of digiturk channels with programmed OPOS 1.05 !!!

jpmm

Hi,

I tried to program the opos 1.05 card with cas3. Here are the steps I followed:

1- opened studio6.6
2- Inserted card, with the chip facing down, into top slot
3- message displayed:

"keys removed

4- loaded files (3):

cryptkey file: OPOS_Cryptoworks_CryptKey
eeprom file: OPOS_Cryptoworks_CryptApp.eep
flash file: OPOS_Cryptoworks_CryptApp

5 - selected "write" button
6- message displayed "erasing...writing flash..."
7- message displayed "programming succeffully"
8 - Selected "exit" button
9 - In previous menu selected "utilities->phoenix->smartmouse 3.579 Mhz->hide"
10 - In the directory of the opos loader, with the dat file within the same directory as the loader I clicked the loader file:

OposCwUpdate (loader file -MFC Application)
OposCwUpdate (Latest DAT file)

11 - Selected "COM1" in small window visibled
12 - Pressed "OK"
13 - Message displayed "Updated"

14 - Inserted the card into the cryptoworks cam (by SCM mycrosystems) and the cam into the receiver's (mirage900sci) slot.

Finally I selected channels from digiturk package but could not open any of those channels.

I got the message:

"Cannot view the service on these channels - Cryptoworks v4.00.008 "

Any sugestions on what am I doing wrong?

The ATR now when I insert the card and select "ATR" button is:

keys removed

Thanks

Analoguesat

DO NOT posts keys of ANY SORT on this forum. Next time you get thrown off.

Burnham Beech

The Opos card does not work in all Cryptoworks cams.

Try the five°e file and see if that works.

Burnham Beech

jpmm

You sent me a PM with the message "which file were you referring to when you mentioned the five°e file"

The file I am refering to is Kingston/Arqiva file for Sirius at five degrees East - you can find it on the opos site.

It's only a suggestion to see if an alternative file works - I suspect your cam is the problem.