Samsung DSR9500 - Not recognizing Funcard

jchurch

Hi ,

I`ve just become a member on the forum and have just acquired
a USB Infinity programmer with Fun card 5.
I was hoping that some of you clever guys out there could help me out
with a problem I`ve got.

I have a Samsung 9500 VIA CI which I`ve patched with software version 118 giving the 5 in 1 patch.

I`ve managed to program the funcard OK to get ABSAT channels using the file `2ndfun5in1v1.20_Jula_AU_18.06.2003.`
After unzipping , this comes with a flash.hex file ,
`eprom_integral.hex` file and a `eprom_by_jula.hex` file.
All these load into the funcard5 via the Infinity USB programmer
with no problem. After I insert the card in the Samsung9500 it recognises the card as a Mediaguard card OK.


My problem is when I try using a different 6in1 file.
I downloaded the file off Phillsfiles.com. It is called
`davem_fun_6in1_030703.zip`.
After unzipping it it and reading the readme.txt it looked like the
files should work with a Samsung9500.

The files that I loaded onto the funcard5 were :
`flash_6in1_v4.3.hex` into the flash area of the card.
`eeprom_H_030703.hex` into the external eprom area of the card
I left the internal eeprom area blank.

Unfortunately the Samsung does not recognize the card and when I go into
the card information menu on the Samsung whereas it said mediaguard on the `2ndfun5in1v1.20_Jula_AU_18.06.2003.` files it now says
`no card` with the davem_fun_6in1_030703 files

Does anybody know why the samsung is not recognising the card.

Do I need a different type of card - eg Gold or silver ?
Do I need a different CAM.Eg Irdeto - as I understand that a lot of the
5 in 1 files operate via irdeto somehow.

I was under the impression that the 5in1 patch allowed the Samsung to
recognise : Viaaccess ,conax , Seca Mediaguard , Nagro.
I`m not sure if it does the irdeto. Does anybody know ?

Any help would be most appreciated.

Its all a bit confusing at the moment but I hope to get my head around it in the next couple of weeks.

Thanks in advance for any help.

rolfw

Although I have no experience with the patched Sammy, is there a CAM menu in which you can select different modes for the CAM, it certainly sounds as if you have used the correct procedure with the Dave M files, but may also be worth trying the Xamuh files, they are set up specifically for the Sammy.

Rolf If you enjoy our site, you can help support it by wearing our unique branded merchandise, you can do this by clicking on my baseball cap, making a direct donation with Paypal by clicking on the Donation button below, or using our site supporting advertisers, to do this, click on the central image below. Follow us on Twitter, click on the twitter image.

turny

hi jchurch
the answer to your question has already been answered look at receiver upgrades and a post by steve102 remember reading past posts can be a hive of information some of it good some of it not so good.

jchurch

Thanks Rolfw / Turny

OK thanks for the information. Looks like I need an Irdeto CAM for these type of files then.

reza121

pls help for upgrade eurostar model 9700f

mehdi13523693

i have samsung9500 that cant read card and open the scramble chanales
how can i get a software for opening the scramble chanal without card or with card?

T24

Which samsung 9500 do you have?? VIACI,AY,Ci.........?

mehdi13523693

dsr9500viaci

T24

Yes,your samsung can decrypt Viaccess channels.if your samsung is patched it can

decrypt alot of channels.(load your receiver with samsung EMU) or load a silver card

with bbaio files (6in1) insert the card into the embedded cam.

Ps-insert the card into the embedded cam correctly,the chip downward..

(power OFF/ON)

Load the latest via..files works fine on fun card.

Good luck





Good luck

safad

You can use the funcard with the Sidd-9 files you can found this files in the tonys duo site

T24

Bb aio files (6in1) on Silver card works much better than sidfun9.

ardalanlp

i want software for samsung 9500 VIA CI
and i want watching the nagra channel & irdeto channel
what can i do?
thanks a lot

T24

Do you have a patched VIACI?

check the hardware,software,loader

Menu>system setup>system information.

You never know

mnadeem

hi i have same problem , the fun card is not recognizing with the receiver , but my receiver is not samsung as every one talking , It is redix dt-43 s vaci
software version DT-43S V1.0.00
firmware V1.2.1-1614SA
Terminal serial number 34-1-0001469
Viaccess version 1.1 R 484
terminal application 1000.121

so if any one can tell me what should i do, greatful to him

hormoz

I have the same problem, If you find the answer please say it to me.
Thanks,
Hormoz