URGENT-CT 5000C Flash Dump fileSection for discussion of Clarke-Tech High Definition receivers | |
 |
| | LinkBack | Thread Tools | Display Modes |
| | |
| |||||||
URGENT-CT 5000C Flash Dump fileSection for discussion of Clarke-Tech High Definition receivers | |
|
| | LinkBack | Thread Tools | Display Modes |
09-10-2009
| #1 | ||
| Member Join Date: 07-10-2009 Location: Turkey
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
My System: ClarkeTech 5000C |
I urgently need CT 5000C "flash dump" file. I had a serious problem with my CT 5000C while downloading new firmware. It is not working anymore. I have tried to download the boot software via RS232 but no success. I have to reprogram the flash which I have the flash programmer. The problem is that I couldn't find Flash Dump file anywhere. Does anyone have ClarkeTech 5000C's "flash dump" file. I will very much appreciate your help. Thanks. | ||
|  |
|
09-10-2009
| #2 | ||
| Specialist Contributor  Join Date: 09-09-2008 Location: Republic of Georgia
Posts: 913
Thanks: 14
Thanked 258 Times in 199 Posts
My System: Covering 30W-105.5E range, two motors, C and Ku band. Various receivers/cards/cams/etc. | google for boot_stb7109.stb available on a lot of websites... | ||
|
| |
|
13-10-2009
| #4 | ||
| Specialist Contributor Join Date: 09-09-2008 Location: Republic of Georgia
Posts: 913
Thanks: 14
Thanked 258 Times in 199 Posts
My System: Covering 30W-105.5E range, two motors, C and Ku band. Various receivers/cards/cams/etc. | you CAN'T FLASH at home via JTAG  You need to de-solder flash chip, put into programmer and update in such way... | ||
|
| |
|
14-10-2009
| #5 | |||
| Member Join Date: 07-10-2009 Location: Turkey
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
My System: ClarkeTech 5000C | BombedOne, It is exactly what I will do. This is the only way. I will de-solder flash chip, reload it with programmer and solder it again. The problem is that I can not find the "Flash Dump" file. Can you help me to find it? Thanks.
| |||
|
| |
|
14-10-2009
| #6 | ||
| Manic Midlander Moderator  Join Date: 24-09-2006 Location: West Midlands. UK
Posts: 736
Thanks: 6
Thanked 81 Times in 75 Posts
My System: Dreambox 7020si, Technomate TM600, Technomate TM9100 Fracarro Penta 85 Dish, Televes 0.6dB Quad lnb, TM SG2200 motor. 60cm Channel Master BSB dish on 28e, Mti Blueline 0.2db Twin Lnb. Rover ST-4 Meter Cyfra+ Subscription | Have you considered contacting Clark Tech  They are more helpful than you think   Nano | ||
 Sanity is nothing more than an excuse to be boring <<<<<<<<****** Dreambox DM7020 Si , S.I.F 1.9.3d ******>>>>>>>>> <<<<<<<<******** Technomate TM9100, EDG 4.4 ******** >>>>>>>> <<<<<<<<<<******* Technomate TM600, UR 23 *******>>>>>>>>> | |||
|
| |
|
15-10-2009
| #7 | ||
| Specialist Contributor Join Date: 09-09-2008 Location: Republic of Georgia
Posts: 913
Thanks: 14
Thanked 258 Times in 199 Posts
My System: Covering 30W-105.5E range, two motors, C and Ku band. Various receivers/cards/cams/etc. | So, you have to buy another one, to get it's flash dump then sell it to people over internet - to get money back p.s. how you managed to kill the bootloader? | ||
|
| |
|
| Bookmarks |
| Tags |
| 5000c, dump, file, flash, urgentct |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
