Nagravision

**richardp** · 17-04-2003

i HAVE A GEMPLUS CAM AND FUN 4 CARD, IS IT SIMPLY THE CASE TO FIND A WORKING FILE STICK IT IN THE RECEIVER AND HEY PRESTO!

**2old4this** · 17-04-2003

what kind of receiver, and what firmware have you got loaded in it (original, or patched?)?
Do you have any other types of CI CAM?

**richardp** · 17-04-2003

Hi
I have a manhatten dsr 5500 original firmware along with a irdeto4.7se cam.
I especially want to view polsat channels,and also is it neccessary to use fun 4 cards rather than straight forward fun cards.
Richard.

**2old4this** · 17-04-2003

A "FreeCAM2" will work with a standard funcard suitably loaded with the 6-n-1 files to give access to Nagravision. A funcard will not however work in your Gemplus Nagra CAM.

If your Irdeto CAM is indeed a 4.7SE then it means it must already have been reprogrammed by a hobbyist or satellite dealer, since no CAM was ever originally shipped with that firmware. So it should be reprogammable again, to a FreeCAM2.
Please check the part number on the back and cross-check it here to verify that:
http://www.satellites.co.uk/php-bin/...&threadid=1674

**richardp** · 17-04-2003

Hello again.
I don't really want to mess about with the Irdeto cam as it was very expensive and I'm not to clued up on patching or flashing cams,when you say a funcard won't work with the gemplus cam are you saying that a funcard4 won't work either,basically should a funcard4 work with the cam given the right files.
Richard.

**rolfw** · 17-04-2003

The only files that I've seen for the Nagra CAM are for gold cards Richard. If you have a Windows 98 loaded laptop, flashing a CAM is quite easy, but if you are not confident, then you are probably right to leave it alone.

**richardp** · 17-04-2003

Many thanks,I'll have a look for these files.
Richard.

**2old4this** · 17-04-2003

Win95 also works for flashing the CAM. But not all laptops work. I use a Toshiba Tecra with win95 and it works every time. It's definitely worth flashing the CAM to a FreeCAM2 since it will then handle 6 different encryption systems rather than just 2 (Irdeto & Betacrypt). And you can use it in any patched or unpatched CI receiver.

2old

***Burnt Chips*** · 17-04-2003

I think hes on about the Auto-updateing files (on the Dudez) for a fun4/gemplus /nagra setup, but he will need to find the cam box key to use these, (and i aint got a gemplus so i dont know how)

sunshinefr · 02-09-2003

Is it possible to watch hispasat30° channels with progdvb or multidec 9.x, can i use softcam_key for this.
Thanks.

**rolfw** · 02-09-2003

Yes you can, it is part of the six in one file. All you need is hex to MD converter, see the downloads section at the top of the page.

sunshinefr · 02-09-2003

Thanks rolfw

**richardp** · 17-11-2003

Originally Posted by 2old4this

Win95 also works for flashing the CAM. But not all laptops work. I use a Toshiba Tecra with win95 and it works every time. It's definitely worth flashing the CAM to a FreeCAM2 since it will then handle 6 different encryption systems rather than just 2 (Irdeto & Betacrypt). And you can use it in any patched or unpatched CI receiver.

2old

I am very intrested in flashing my irdeto cam, could you explain to me the process involved and what bits and bobs I need to do this or perhaps a link to where I might get this info.
Richard.

P.S. Why do I need a laptop?

**rolfw** · 18-11-2003

Hi Richard, you need a laptop, because you sit the CAM in the PCMCIA slot. What version is your Irdeto CAM, it will only work with the older ones.

**richardp** · 18-11-2003

Originally Posted by rolfw

Hi Richard, you need a laptop, because you sit the CAM in the PCMCIA slot. What version is your Irdeto CAM, it will only work with the older ones.

Hi.
It's a 4.7 se.

**giver** · 09-12-2003

The gemplus cannot be updated by any means but a special loader that is not public.
And i don't believe there is any patches for this CAM to make it work in other encryptions,as far as i know.
If you know,please post,as i have one and I had to pull out the tsop to read the boxkeys,but i would be glad to find out if there is a patch for it.
Thank you

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nagravision Keys?Still not working?	Neo	Keys and Key editing	19	27-12-2008 10:43 PM
Help a Poor Yank w/ embedded Nagravision	CptJack	Conax, Cryptoworks, Nagravision, NDS and Others	0	11-02-2004 05:44 AM
Nagravision	Shaun	Conax, Cryptoworks, Nagravision, NDS and Others	1	29-09-2003 04:59 PM
TV Cabo in new Nagravision	net1	Daily Satellite and Broadcast industry News	0	30-07-2003 07:19 PM

Nagravision Discussion on specific encryption techniques not covered in the above forums

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)