Finally I Have ** Dishtv

das

Yes I Have Done It With A Boot Loader And A New Firmware Version

member91040

Ths good das...! Soo pls tell everybody , The procedure soo that every one can fallow your path.

das

First change the bootloader
1. download all the bootloader like kaon and sunny/kaon
2. load the firmware (XSC 550ANV) with kum 230 patched
3. enjoy.

dspdsp

Great man,
But please provide step by step procedure.
Is it possible to downgrade firmware for Zenega receiver too?

Hareesh

Dear das pls provide all details.If it cannot be disclosed publically (against rules) be generous to share the same with members thru PM and those who can simulate the same with Zenega/Kaon STbs.
Experimenters,pls have a detailed step by step procedure for the same.
Requesting the response from members those who have tested the same.

**************************************************

Analoguesat

There is no problem with providing step by step details of the receiver modification procedures on the forum. Also, loaders are ok to put on the forum for the benefit of members, but firmware images for receivers are not permitted.

Its ok to put NONE CLICKABLE links to firmware in a post

Put an underscore in front of the url like this

_www.bbc.co.uk

or mangle the url like this

w*w.bbc.co.uk

Analoguesat's message to the world Analogue forever!

Analoguesat

However once again we must make the following warning. Do not try any receiver modifications UNLESS you know exactly what you are doing, and accept if anything goes wrong you will probably wreck your receiver.

I strongly advise that you do not try these modifications on the satellite box the family depend on - you will not be popular if you wreck it!! Find a second one to experiment on

Analoguesat's message to the world Analogue forever!

das

1. go to hxxp://www.sat.us.pn
2. download the bootloader and follow the instruction
3. download the original firmware under tab original firmware (XSC-550ANV)
4. download the kup230 engineered patch.

Be careful what you are doing it at your own risk.
I have done it my receiver is changed and its working all well, except the front display.

Hareesh

Thnks DAS
I have added Direct link for those anxious experimenters.Pls Do it at YOUR OWN RISK
Step 2 link h**p://**w.alice-dsl.net/kao/a/boo.htm
Step 3 link h**p://**w.alice-dsl.net/kao/a/firmo.htm
Step 4 link h**p://**w.alice-dsl.net/kao/a/util.htm

Pls post your results.Check after the OTA updates and post the outcome if any.
As Analog told test it with a second one.If you have done modifications Dish TV won't replace it even!

**************************************************

ssantosh78

All,

Pls do not try this shit with u r dishtv STB, as i have lost my spare dish tv Kaon stb. Now its showing me flashing dish on top of the left, without any signal & power quality.

If anyone knows how to recover the same, pls let me know.

Thanks,
Santosh

new_dxer

not working Bro. showing "Target Model Mismatch" error

xman2

hi which boot loader should i down load for KSC-570(original firmware)

ssantosh78

new_dxer

While upgrading firmware u have to press spacebar then only it will upgrade u r firmware.

Santosh

sjude

Any firmware for Kaon DVR model KSC-N620MCOH2 which is receiver with HDD. I am not getting Active channels.

TheMafioso

Intesting Stuff....But what are the advantage of this flash, you didn't mention

dspdsp

After taking backup of ROM, is there any way to modify this ROM?
We can use Hex Editor to modify ROM file but how to find out where to modify ( offset ) what to modify?
If we can modify certain bytes which at particular location ( offset ) is it possible to bypass authentication?

sjude

Funny ! Isn't it ?

There is a topic started and everyone is interested and then it is dead with no new post. 2 weeks and nothing news about the crack in the encryption. Das started the topic saying - "Finally I have Dish TV". What does it mean ? He went for Dish TV package or he got a crack to get Dish TV free on a Kaon receiver ?