topfeild 4000 pvr plus help .

gnomegreen · 02-10-2009

Hello. i just recived my toppy connected it up and i gt a signal,and can veiw programs, however i cant record or use the pause rewind function, ive looked in the manual but can find no answers, can anyone help , thanking u kindley, wilson.

**Topper** · 02-10-2009

Originally Posted by gnomegreen

Hello. i just recived my toppy connected it up and i gt a signal,and can veiw programs, however i cant record or use the pause rewind function, ive looked in the manual but can find no answers, can anyone help , thanking u kindley, wilson.

Do we assume that you have fitted a twin output lnb and a second sat cable from the 2nd lnb output to stb?

gnomegreen · 02-10-2009

Originally Posted by Topper

Do we assume that you have fitted a twin output lnb and a second sat cable from the 2nd lnb output to stb?

yes. ive got a twin lnb set up, from an old sky plus set up, i thought this machine was pvr ready to go, but nothing, i cant figure it out , when i put the machine on in in the menu section, it says record option but this is in grey, and that means you cant get into it for some reason anyideas ?

**Topper** · 02-10-2009

If using the existing sky+ cabling have you tried

1. Swapping the two leads over, any change?

2. Checked to see that a child has not removed an F-connector and just pushed it back on shorting out one feed

2. Is there enough central core protruding to make sufficient contact?

3. In the menu there could be an option for single feed operation that is selected.

4. Your lnb actually has two feeds leaving the lnb as some people think you can just use a splitter and you cannot

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

topfeild 4000 pvr plus help . Information exchange on digital satellite systems other than Sky

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)