HISPASAT in USInformation exchange on digital satellite systems other than Sky | |
![]() |
| | LinkBack | Thread Tools | Display Modes |
![]() | ![]() |
| |||||||
HISPASAT in USInformation exchange on digital satellite systems other than Sky | |
![]() |
| | LinkBack | Thread Tools | Display Modes |
| | #1 | ||
| Guest
Posts: n/a
| Hi guys,i live in the US and i'd like to get hispasat,i'm located in the east coast,i'd like some info about which channels i can receive here and the hardware and software i need as the type of dish and ird with smart card,any help will be really appreciate it,thanks | ||
|
| | #2 | ||
| Specialist Contributor Join Date: 01-01-2000
Posts: 457
Thanks: 0
Thanked 2 Times in 2 Posts
| Which channels are you hoping to recieve? Firstly even on the Eastern sea board ( in which area do you reside) the 30.0 orbital slot is low on the horizon. secondly the vast majority of the transponders and channels are directed to Europe and not the USA. 12.172H is directed to the USA along with 12172 V Take a look at the channels with a footprint listed as America Both the Europe and Spain listed transponder channels would require a very very large dish in the USA, and is not an easy option at all ! There are many other satellites that can be accessed from the USA however- what would you like to recieve? http://www.lyngsat.com/hispa.shtml Regards Old Satellite | ||
| | |
| | #5 | ||
| Post Meister Join Date: 01-01-2000 Location: Manchester
Posts: 191
Thanks: 0
Thanked 0 Times in 0 Posts
My System: Technomate 1500ci+ super Triax 1.1m dish Diseqc motor Invacom lnb | You wont get anything from European satellites m8, as they are well below your horizon. Your only option would be to look through Lyngsat website and see if there is anything you can get on the USA based sats. http://www.lyngsat.com/america.shtml Lee | ||
| | |
| | #6 | ||
| Guest
Posts: n/a
| hey m8 u guys know more than me about hispasat,i live in the US and i get DTV,DISHNETWORK and BELL EXPRESSVU,but i was doing some research and take a look at this here,i live in INDIANAPOLIS and they have service there and azimuth,elevation to point the dish,check it out and let me know,thanks a lot http://www.hispasat.com/FlotaSat/pop_up_cobH1C.htm | ||
|
| | #7 | |||
| Post Meister Join Date: 01-01-2000 Location: Manchester
Posts: 191
Thanks: 0
Thanked 0 Times in 0 Posts
My System: Technomate 1500ci+ super Triax 1.1m dish Diseqc motor Invacom lnb |
What you see there is the overall footprints for all the beams.You need to look at the individual footprints.The channels you are after are all on the European beam, and not the American beam so you wont be able to receive them. Lee | |||
| | |
| | #8 | ||
| Guest
Posts: n/a
| ok m8 thanks for all your help,now here' this package that i'd like to get in US,is RTVE digital package from hispasat,here on this page they say that with a 20inch i can get the signal,etc please let me know the following: receiver? access card? dish? programmer? etc i know is encrypted in NAGRA so i have to extract the boxkeys and stuff like that,please help me put m8,thanks here; http://www.geocities.com/NapaValley/...rhispasat.html | ||
|
| | #9 | ||
| Post Meister Join Date: 01-01-2000 Location: Manchester
Posts: 191
Thanks: 0
Thanked 0 Times in 0 Posts
My System: Technomate 1500ci+ super Triax 1.1m dish Diseqc motor Invacom lnb | I cant advise you what equipment to buy as i dont know anything about the US sat scene, or what type of equipment you use over there.Sorry i cant help you more, but maybe one of the mods on here can direct you to a US based forum. Lee | ||
| | |
| | #10 | ||
| Specialist Contributor Join Date: 01-01-2000
Posts: 457
Thanks: 0
Thanked 2 Times in 2 Posts
| Firstly at your location have you assesed if you have a clear line of site to the satellite? The 30.0 orbital slot is low on the horizon at your location (RTVE)on 12502 is recievable at your location if you have a clear veiw. For those signals I would suggest that you need an 1.2 mtr or approx 4 ft dish from your location.- a 2ft is to small at your loaction I would suggest. There are a number of major satellite vendors within the US that can supply all what you need http://www.gofastmotorsports.com/rickssatellitehome.htm Here is one from a quick scan of the net "Vincor" is also very large not to far away also. Regards Old Satellite | ||
| | |
| | #11 | ||
| Guest
Posts: n/a
| k m8, i got a signal strengh from hispasat of 91%,here in USA,right now at this moment,but i have an echostar ird from dishnetwork and that's it,i know that the palco channels are in nagravision,can u tell me what kind of receiver,smartcard,programmer,jtag,etc i need at this point,thanks a lot | ||
|
| | #15 | ||
| Honorary Admin Join Date: 01-01-1999 Location: Cloud Cuckoo Land
Posts: 1658
Thanks: 0
Thanked 15 Times in 9 Posts
| Summing up: The channels that are transmitted from 30W (the Hispasat cluster of satellites) are listed here, together with information such as encryption type and the beam on which they are carried: http://www.lyngsat.com/hispa.shtml Where only a provider/package is mentioned, click on its "DIG" icon to see the individual channels. For RTVE you then get this page: http://www.lyngsat.com/dig/rtve.shtml There you can see that those channels that are encrypted are encrypted in Nagravision. The footprints of the beams of the various sats are seen here: 1A/1B - http://www.hispasat.com/FlotaSat/pop_up_cobH1AB.htm 1C - http://www.hispasat.com/FlotaSat/pop_up_cobH1C.htm 1D - http://www.hispasat.com/FlotaSat/pop_up_cobH1D.htm All of those footprint maps indicate the strength of the signal in dbW at particular locations within the footprints. To get an idea of the typical dishsize needed for a particular signal strength, use this: http://www.mlesat.com/calculat.html See also our "how to" section, this thread: http://www.satellites.co.uk/php-bin/...&threadid=4386 In order to decrypt Nagravision channels, you either need an official subscription (which is paired to a particular identifier, or boxkey, in the CAM or receiver) or else a pirate card. The easiest pirate solution is to use a suitably programmed Funcard (using the so-called 6-in-1 files) though I'm not sure offhand whether those files contain the keys of the particular provider you are interested in. Such a card can be used in combination with one of the various multi-encryption enabled CI CAMs (eg FreeCAM, Magic CAM, etc) or else with one of the receivers whose software can be patched to make its internal CAM act like freecam/etc. Such receivers are the Humax 5400, the Samsung 9500, and more. I have no ide whether they are available on the US market, but I do not believe that your standard US-market Echostar/dishnetwork box will suffice. 2old | ||
| | |
| | #16 | ||
| Member Join Date: 13-06-2005 Location: spain and florida
Posts: 45
Thanks: 0
Thanked 0 Times in 0 Posts
My System: kaon 570 comag sl 55 neotion 3000, antennas 60,80 150 and 250 cts c-band Q- band |
hello do you happen to know tehe rtve nagra keys for the americas??? thanx adrien | ||
| | |
![]() |
| Bookmarks |
| Tags |
| hispasat |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Que canais ha em sinal aberto? | soprano53 | Kaon | 2 | 03-08-2006 06:03 AM |
| Novas Frequências Hispasat | jccs | Assuntos Gerais | 8 | 06-06-2006 11:19 PM |
| Novas frequencias no hispasat 23/05/2006 | filtro | Instalações de Antenas & Frequências dos Sats | 1 | 24-05-2006 07:49 PM |
| Hispasat lobbies for a Digital +'s contract | net1 | Daily Satellite and Broadcast industry News | 1 | 15-08-2004 07:12 PM |
| Hispasat sets eyes on Latin America | net1 | Daily Satellite and Broadcast industry News | 0 | 26-09-2003 07:22 PM |