visionnet 8000s

dansassoon · 14-07-2008

can someone help i have visionnet 8000s
i need code of visionnet so that i can use it with universal remote control

**Topper** · 14-07-2008

Most universal remotes that I have come across have a search mode which allows you to lock on to any IR frequency within its memory. If that is not working I suggest you contact the manufacturer here because there is no mention of it in the pdf for your stb. As a last resort just try some popular codes, a list is here

dansassoon · 15-07-2008

thanks for reply but it did'nt help me

i can't contact matrix system with email because they need some kind of password
is there any other way to find out what is the code of remote control of visionnet

dansassoon · 3 Weeks Ago

untill last week i was getting good reception much sharper image

But suddenly this week it seems that the picture is not so sharp a can see it on logo

Does this has someting to do with the broudband router that i changed this week or

Does this has to do someting with dish or satelite recever i don't understand why the rception is not sharp as before

**HB13DISH** · 3 Weeks Ago

Originally Posted by dansassoon

untill last week i was getting good reception much sharper image

But suddenly this week it seems that the picture is not so sharp a can see it on logo

Does this has someting to do with the broudband router that i changed this week or

Does this has to do someting with dish or satelite recever i don't understand why the rception is not sharp as before

It would help if you tell us which satellites and which channels are you talking about.
Why would the router has anything to do with this?

dansassoon · 3 Weeks Ago

Most of channels

I have:
AMOS
NILESAT
ARABSAT
HOTBIRD

most of the channels like mbc action, mbc movies, cinama1,2,3 they were very sharp when i vieved on 37" lcd but suddeny something is changed it is not so sharp my be it has to do something with the tv setting in menue in vissionnet 8000s

The tv settings in lcd i didn't changed

**HB13DISH** · 3 Weeks Ago

Originally Posted by dansassoon

Most of channels

I have:
AMOS
NILESAT
ARABSAT
HOTBIRD

most of the channels like mbc action, mbc movies, cinama1,2,3 they were very sharp when i vieved on 37" lcd but suddeny something is changed it is not so sharp my be it has to do something with the tv setting in menue in vissionnet 8000s

The tv settings in lcd i didn't changed

I take it that this happens also with FTA channels or is it only with encrypted channels?

dansassoon · 3 Weeks Ago

it happens with all channels

**HB13DISH** · 3 Weeks Ago

Originally Posted by dansassoon

it happens with all channels

I suspect the receiver. Might be anything: Tuner, power supply, etc.
If you have or can borrow another receiver, you can test and see if the picture is better.
Have you tried shuuting it down (pull the power cord), wait few minutes and switch again.

dansassoon · 3 Weeks Ago

shuuting it down (pull the power cord), wait few minutes and switch again. I will try this at home

Thanks for very fast reply

Secondy i want to ask if is it worth buying upscaler so i can connect from scart out of my visionnet 8000 to hdmi of sony (lcd) and get better picture

**HB13DISH** · 3 Weeks Ago

Originally Posted by dansassoon

shuuting it down (pull the power cord), wait few minutes and switch again. I will try this at home

Thanks for very fast reply

Secondy i want to ask if is it worth buying upscaler so i can connect from scart out of my visionnet 8000 to hdmi of sony (lcd) and get better picture

First try to get the receiver to work as it used to or face the possibility to send it for repair or even worse buy a new one.

***zorba*** · 3 Weeks Ago

We had a lot of visonnet receivers develop power supply faults over here because of cheap inferior capacitors. Symptoms included wavy lines over the picture(on AV) sometimes no signal,rebooting etc.
Replacing the caps with high temperature ones cured all faults.

dansassoon · 3 Weeks Ago

I did what you said ' removed the cord and switch again .
It did help the picture was much sharper.

Now to the next quastion as the visionnet only has scart out do you think if i buy a upscaler to connect it to hdmi of lcd will improve the quality better than what i am viewing today

**HB13DISH** · 3 Weeks Ago

Originally Posted by dansassoon

I did what you said ' removed the cord and switch again .
It did help the picture was much sharper.

Now to the next quastion as the visionnet only has scart out do you think if i buy a upscaler to connect it to hdmi of lcd will improve the quality better than what i am viewing today

Good.
I think that the SCART video out is the best that you would get.
Haven't used an upscaler and frankly I don't know what it is but you are welcome to try it and report back.
There is another possibility that you should take into account and it is the channel video and audio bitrate, which can be measured using a bitrate monitor, at least with my Dreambox 7000S.
Channels on Hot Bird 13E have all kind of video quality and resolutions and the higher the bitrate, the better picture you will get.
Therefore channels transmitting at low bitrate will not give you a good picture, especially on a large LCD TV screen.
As an example, channel NRJ12 has a good V/A bitrate, so see how it looks on your screen.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Who Can Help Me Out? Visionnet	carlitosway	Keys and Key editing	3	10-11-2006 05:15 PM
Visionet 8000s	Cheekykid	Receiver software, international Section	0	06-03-2006 11:47 PM
who makes visionnet?	the_wizzz	Receiver software, international Section	3	11-10-2005 04:02 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)