visionnet 8000s

***closetosoton*** · 06-10-2005

i'd never heard of this receiver until today. is it a dreambox clone?
http://www.satellitesuperstore.com/visionnet.htm

-cts

***easysat*** · 12-10-2005

There's a manual here: http://www.matrixxsystems.de/index.php?id=dokumente0&L=1 but as far as I can see it's not running any open source software. Maybe it's just a common or garden receiver with an Ethernet port.

zdan · 19-05-2006

This IP satellite receiver, more channel can be viewed. work on card sharing over the internet.

***racingclubuk*** · 19-05-2006

I had one of these for a while then ebayed it....

my thread can be found here:

Visionet VN8000s

if you already have a DB maybe you want to learn about gbox?

aphex · 10-06-2006

hello i have a visionnet and a dreambox, the visionet its a kind of easy dreambox specially made for card sharing over i.p but you can do much more settings with the dreambox.

**gov400** · 15-06-2006

this reciever sux. I was gonna get it but got a dream 7020. The better choice and more options availible

shtayeh · 16-07-2006

I need your help
I have VisionNet 8000S
I want to know the Site http:// for utomatic Update for NetVision 8000s
Thank you
Dr. Shtayeh

**Llew** · 16-07-2006

Don't know about automatic uploads, but as easysat mentioned earlier in the thread, there's some tools for the VisionNet 8000s here which may help -

_www.matrixxsystems.de/index.php?id=download&L=1

Llew

aphex · 24-08-2006

hey

go to

www,vnsupport,org (visionnet best forum, i think)

you will fund many softwear and direct link to update the visionnet from the settings menu over internet

bye

**rogue_element** · 25-08-2006

*racingclubuk

in the other thred you said you would Ebay

the stb if the service went dead, in this one you say that you have Ebay

'd it can i take it from that the service is now dead?

dansassoon · 01-11-2007

HI i have a visionnet 8000s , i want to know if it has digital out because when i search on internet this satelite recever is shown with digital out the one above video on the back pannel but in fact in my user manuel that came with the visionnet 8000s it shows (o/12v output to connect 12v to an external 0/12v switch), may be this recever is dublicate. If so can some one help me how to convert audio Right and left to digital so that i can connect it to my home theater system with digital coaxial or opti inn.

**HB13DISH** · 02-11-2007

Originally Posted by dansassoon

HI i have a visionnet 8000s , i want to know if it has digital out because when i search on internet this satelite recever is shown with digital out the one above video on the back pannel but in fact in my user manuel that came with the visionnet 8000s it shows (o/12v output to connect 12v to an external 0/12v switch), may be this recever is dublicate. If so can some one help me how to convert audio Right and left to digital so that i can connect it to my home theater system with digital coaxial or opti inn.

If it doesn't have audio coax or opti, then it is not possible to convert the RCA left and right analogue signals to digital.
If this is important to you, try exchanging it for a dreambox model which has digital audio.
With my 7000S, I am quite happy with the RCA connectors sound and didn't even bother till now to use the digital out.
It all depends on the sound quality of the channels that you are watching.
A bitrate monitor plugin can show you the audio quality, in addition to the video quality of the channel (for a Dreambox)

dansassoon · 02-11-2007

Thanks for advice i wiil look for it. second thing if some one can find for me the ir codec of visionnet 8000s because i have a universal remote control that works for me with tv, dvd, recever and video the only problem is it does'nt have ir codec of visionnet.

**mhku** · 02-11-2007

Does it have an orange output socket on the back? If it does, that's a digital out.

Can you show us a photo of the back of your box?

**Turok** · 02-11-2007

Hi!
i also have bought this reveiver,but never use it,think now all servers are dead,never upgraded my firmeware,so what i must do,and where i can find the latest one?
version 1.0 that i have installed curencly,does not have manual search function,the mvision reveiver,it seems to be very simular,but the problem is the channel search,i dont find and settings,or editor,where i can load into this reveiver,software,looks realy beta,now i can trouth out,of the window,coz it is useless..
does anyone know where i can change,the bootloader,i try to download an asia firmware on it,but with european loader on it,it does not work!
in the past asian firmeware,supports multichoice on 68,5!

dansassoon · 02-11-2007

It has audio left audio right, video and one more output which according to manuel in internet suposed to be digital but in my recever itis black output and in my manuel it is written (o/12v output to connect 12v to an external 0/12v switch), secondly im am searching for ir codec of this visionnet 8000s for universal remote control

**HB13DISH** · 05-11-2007

Originally Posted by dansassoon

HI i have a visionnet 8000s , i want to know if it has digital out because when i search on internet this satelite recever is shown with digital out the one above video on the back pannel but in fact in my user manuel that came with the visionnet 8000s it shows (o/12v output to connect 12v to an external 0/12v switch), may be this recever is dublicate. If so can some one help me how to convert audio Right and left to digital so that i can connect it to my home theater system with digital coaxial or opti inn.

Dan,
I don't know which satellites your dish is pointing to since your profile doesn't show this, but which channels are you trying to receive which has AC3 sound ?
I connected the Optical Digital output on Dreambox 7000S to my receiver and since there are hardly any channels with AC3 audio sound on Hot Bird 13E, this output is not going to be of much use.
This means that even if your receiver does have a digital audio, then you are not going to enjoy listening unless you can receive loads of channels with AC3 broadcast.
The only channel I found which has AC3 sound option is NRJ 12 11,585V.
By the way, this channel has also a great sound on the standard option with bitrate of 320 kb/s.
If you know of other channels, let us have the list.

dansassoon · 05-11-2007

Ok its clear for me about sound. im am searching for ir codec of this visionnet 8000s for universal remote control

**HB13DISH** · 05-11-2007

Originally Posted by dansassoon

Ok its clear for me about sound. im am searching for ir codec of this visionnet 8000s for universal remote control

I tried to look for it but without luck.
Actually, personally I am happy only when I have ten different remotes on the coffee table, but I guess that it is important for you to have just one remote.

**billnot** · 05-11-2007

If anybody wants my Visionet 8000, they can have it for the cost of postage - just PM me. It's sitting gathering dust. One of the worst buys I ever made.

terry2k4uk · 08-11-2007

i really ewould like to have it , please, how much is the postage to manchester, if you still have it

**billnot** · 08-11-2007

Originally Posted by terry2k4uk

i really ewould like to have it , please, how much is the postage to manchester, if you still have it

From Spain, where I live, postage would be €30 (£20).

I can't send you a PM as it has not yet been enabled for you, so if you're interested go to the website in my profile, from which you can send me an e-mail. We can then exchange details that we wouldn't want posted in a public forum.

dansassoon · 19-06-2008

recently i have some problem with visionnet 8000s

when i am watching channels every thing is ok but if shut off the recever with remote and make it on after some time, I don't see all channels

Only after i turn on and off the switch at the back of recever then after that i am able to watch channels

Why this is happening is there any problem with the recever

or it is linked to internet connection

**HB13DISH** · 19-06-2008

Originally Posted by dansassoon

recently i have some problem with visionnet 8000s

when i am watching channels every thing is ok but if shut off the recever with remote and make it on after some time, I don't see all channels

Only after i turn on and off the switch at the back of recever then after that i am able to watch channels

Why this is happening is there any problem with the recever

or it is linked to internet connection

Does this happen also with FTA channels?

dansassoon · 23-06-2008

It happens only with channels with ($) sign the channels that are payed

the channels do come back after i do restart to receiver

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)