adding channels technomate 1500ci+?

NiPsTeR

hey peeps,

I have a technomate 1500ci+ and i add the transponder etc for a manual channel add in the PID search menu then do a scan and it successfully finds the channel i add manually in the scan list however when i come to go through all the channels its found some of them aint there.

Is there any valid explanation to this or am i doing anything wrong ? if so what am i doing wrong

thanks in advanced

PS i have no options for 3/4 stuff please help!!

Jeff_19341

After putting in the parameters for a new transponder, go to "Save TP" and click on OK, then scan the TP.
As far as FEC is concerned ie 3/4, the auto function should work OK when you scan a transponder. Failing that go to FEC and press the right or left arrow key to change FEC's. You should get auto, 1/2, 2/3, 3/4, 5/6 and 7/8.

notorious19

have you got too many channels saved ? try doin a search without the radio channels,i have a 1500 super and this happened to me a few times till i discovered had to many chs saved and when i did search without the radio ones it saved the others, might work for ya