Am Losing My Hair Dish Problem | |
![]() |
| | Thread Tools | Display Modes |
![]() | ![]() |
| | #1 | ||
| Member Join Date: 13-12-2005 Location: WestMidlands
Posts: 14
Thanks: 0
Thanked 0 Times in 0 Posts
My System: NONE |
I have 1.8 dish I gave up on nilesat because i was unable to pickup the signal so I decided to use it on arabsat instead with cambridge c120 universal lnb the problem is am drying to pickup arabsat 26E and I been doing this for almost a week now but no luck i was able to pickup hotbird, astra 19E also astra 28E but not arabsat am I doing something wrong here is a picture of the dish | ||
| | |
| | #2 | ||
| Super Moderator Join Date: 10-12-2004
Posts: 2167
Thanks: 3
Thanked 230 Times in 208 Posts
![]() | With a 1.8M dish you shouldn't have any problem, except perhaps too much signal from 28.2E. The 3 satellites you have mentioned are all very powerful and so you can get them with a much smaller dish, 35cm, which means they are easy to find. Try TV5 11747 V 27500, this has a powerful signal, and there are no vertical channels on 28.2E close enough to cause a problem. Then move your dish to 28.2E, change the channel to TV 5, and move your dish gently a couple of degrees to the left, as your facing the dish, you might also need to alter the elevation slightly, but if your dish is in good condition a little patient manoeuvring should get it. | ||
| | |
| | #3 | ||
| Super Moderator Join Date: 17-05-2007 Location: Kent,UK
Posts: 2977
Thanks: 46
Thanked 392 Times in 379 Posts
My System: TM6800HD+TD110+StabHH90 motor,TM1000D+Orbital 1m Multifeed 16E,23E,28E.DigitAlB movies. A Bigsat BS-S77CX and a Sky Dodgibox. | Hi Is it Arabsat 2B at 30.5E or Badr 3/4 26E? Also remember that there are C band transponders there also, which you won't get unless using a C-band LNB. | ||
| | |
| | #4 | |||
| Regular Member Join Date: 05-10-2005 Location: UK.
Posts: 125
Thanks: 0
Thanked 7 Times in 6 Posts
My System: technomate 1500 strong 4375 pace digi box triax 1.1, triax 88cm |
hi, well i use 88cm from the north east on the badr and at this moment am getting about 56 to 57% goes to 60% at night. you should get it easy, even on nilesat where i once had a 1.6 i was getting about 56% on mbc at night time. just stick a conventional lnb on the end and try that any realy with that size dish for the badr from where you are situated | |||
| | |
| | #5 | ||
| Member Join Date: 13-12-2005 Location: WestMidlands
Posts: 14
Thanks: 0
Thanked 0 Times in 0 Posts
My System: NONE | after 4 hours of battle with the dish i managed to pickup afew channels however most of them are missing and also the 11747 transponder not getting any signal i tryed everything but no luck i think it might be my lnb as the lnb is very old about 8 years old can someone tell me which is the best lnb to go which my dish | ||
| | |
| | #6 | ||
| Specialist Contributor Join Date: 23-07-2005 Location: S.Wales
Posts: 1345
Thanks: 99
Thanked 47 Times in 36 Posts
My System: 1.2M & 55cm Gregorian Dish`s, 1.5m Gibertini on a Jaeger 1224 H-H motor. Dreambox 7025 200gb HD, Vbox-II. SS2 Card. | It looks as if you have got a c-band scaler ring attached to your dish. Any universal C120 lnb should do it. Try invercom or inverto. Lower noise figure the better, some thing like .2db | ||
| | |
| | #7 | ||
| Design Engineer/Installer Join Date: 08-08-2007 Location: Central UK near Jodrell
Posts: 386
Thanks: 24
Thanked 44 Times in 43 Posts
My System: 75e-75w C & KU, 36v diseqc Anlg to HD Channel Master C120 dishes, stbs, lnbs, motors, too much to list | Try washin it... a sky lnb in front of that would get 26e 11919h 27500 try one just to check your c120.... the skew will be about right too.. try 12739 h 2400 on 26e its usually the strongest and no confusion with 27500/22000 fec's on sky.... should be 70-80% of a sky tp what strength did you get on sky and what receiver... any cable problems..? try _http://www.chaparral.net/support/trouble/feedhorn.html to see the problems you can have.... before replacing the lnb Last edited by mhku; 19-09-2007 at 11:48 AM Reason: no live links | ||
| | |
| | #8 | |||
| Member Join Date: 13-12-2005 Location: WestMidlands
Posts: 14
Thanks: 0
Thanked 0 Times in 0 Posts
My System: NONE |
anyway I was thinking of buying these kit below with the lnb I found on a website. | |||
| | |
| | #9 | |||
| Regular Member Join Date: 05-10-2005 Location: UK.
Posts: 125
Thanks: 0
Thanked 7 Times in 6 Posts
My System: technomate 1500 strong 4375 pace digi box triax 1.1, triax 88cm |
i have tried out numerous lnbs and the one i find the best of the lot especially for the sensitive badr, well on my 88cm triax that is, is the titanium, the next best for me on my dish is the sharp, but the titanium does it for me with a tec 1500+, keep on trying you will get there in the end. | |||
| | |
| | #10 | ||
| Member Join Date: 13-12-2005 Location: WestMidlands
Posts: 14
Thanks: 0
Thanked 0 Times in 0 Posts
My System: NONE | Here is some pictures I Just took of my lnb am using on the dish can someone look at the pictures and tell me if the problem from the LNB are feedhorn the LNB is a cambridge universal AE33 C120 0.7db | ||
| | |
| | #11 | ||
| Amo Amas Amant Admin Join Date: 18-11-2004 Location: NW England (Siberia)
Posts: 8172
Thanks: 18
Thanked 256 Times in 239 Posts
My System: IDD CI24 ECONO MM Penta 1.20 Galaxy II 1.2Mtr Polar MTG yes it has been on the arc for 21 years and is still driven by a modified wiper motor from a Ford Anglia. It's like me sometimes groans but always performs ![]() Saved us from the black plague of ignoratio elenchi, he awaits a special badge with jugs |
I know very little about this kind of setup but I have to say the geometry of the whole thing leaves me thinking you are only using about 1/3 of the dish face, most of the signal is passing the waveguide. The focal point seems completely wrong based upon my experiences or it may be an optical illusion. Can you take a pic from the side???
__________________ War does not determine who is right, it determines who is left! Formerly toppervte33h whose six pack has turned into a keg Help support this web site by making a donation Or use other options to help support Sats UK Show Your Support by clicking the button ![]() Thank you. Freddie Flintoff is back | ||
| | |
| | #12 | |||
| Member Join Date: 13-12-2005 Location: WestMidlands
Posts: 14
Thanks: 0
Thanked 0 Times in 0 Posts
My System: NONE |
pickup arabsat C band channels The problem is arabsat 3a digital I was able to get a few channels but most of them is missing and I just don,t no what the problem is my lnb and feedhorn seems fine as I was able to get some of the channels do you no were they sell dish support arm am thinking of moveing the three support arm and put them on the end sides of the dish but the current arms are to small Last edited by ameen27; 22-09-2007 at 06:13 AM Reason: some errors | |||
| | |
| | #13 | ||
| Member Join Date: 13-12-2005 Location: WestMidlands
Posts: 14
Thanks: 0
Thanked 0 Times in 0 Posts
My System: NONE | At last I have Fixed the problem its all was from the lnb and the feedhorn so I replaced them with a new feedhorn kit and a new invacom c120 lnb and walla!! i managed to get arabsat without any problem also very good signal thanks to everyone help!!!!!!!!! | ||
| | |
| | #14 | ||
| Design Engineer/Installer Join Date: 08-08-2007 Location: Central UK near Jodrell
Posts: 386
Thanks: 24
Thanked 44 Times in 43 Posts
My System: 75e-75w C & KU, 36v diseqc Anlg to HD Channel Master C120 dishes, stbs, lnbs, motors, too much to list | pleased to see you got there and thanks for sharing the info | ||
| | |