Hello John Need a new Motor? - Hello John need a new motor? | |
 |
| | Thread Tools | Display Modes |
| |
| |||||||
03-03-2008
| #1 | ||
| Regular Member  Join Date: 28-08-2005 Location: Nottingham
Posts: 183
Thanks: 18
Thanked 0 Times in 0 Posts
My System: 'Fortec Star Passion' (& a dead SL65) One of them big Woks on the outside, and a thingy that moves it about a bit. |
Hello John need a new motor? http://i37.photobucket.com/albums/e6...gJPG_thumb.jpg I think mines had it! Any recommendations?
__________________ _www.Nottstalgia.com The Nottingham Forums | ||
|  |
|
03-03-2008
| #2 | |||
| Believe it when I see it Admin.  Join Date: 01-05-1999 Location: Southern England
Posts: 26740
Thanks: 28
Thanked 572 Times in 390 Posts
Blog Entries: 3 My System: Sky+, DB 7000s, Gemini 4.3 in flash, Var on USB stick. Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Unaohm EP313, Swires Annie 204 Spectrum, Rover ST-4 Spectrum. | I still use Moteck SG-2100 motors, only had a problem with a couple over the years and they seem to work well with most receivers.
__________________ | |||
| |
|
03-03-2008
| #3 | ||
| Member Join Date: 17-10-2004 Location: ireland
Posts: 16
Thanks: 0
Thanked 0 Times in 0 Posts
My System: tm dh 6800+250 hdd usb,tevion hdd/dvd recorder,tevion upscaler hdmi dvd player,philips 42 plasma hd,.beheringer psudo surround thru hi fi ,.. | ive had a stab for the last 6+ years and no problems,... | ||
|
| |
|
03-03-2008
| #5 | ||
| Regular Member Join Date: 28-08-2005 Location: Nottingham
Posts: 183
Thanks: 18
Thanked 0 Times in 0 Posts
My System: 'Fortec Star Passion' (& a dead SL65) One of them big Woks on the outside, and a thingy that moves it about a bit. | The exact spec is below. It seems to work intermittantly? Any way of checking the old one out? The Moteck seems to get a good following here? Motor Geo-Track H120 FEATURE LIST Protocol: DiSEqC 1.2 Compatible Receiver: Receiver with DiSEqC 1.2 or Interface Box Antenna Size: 120cm max. Speed: 1,9° / sec (at 13V); 2,5° / sec (at 18V) Azimuth Angle: 80° East ~ 80° West (160°) Elevation Angle: 25~75° Input Voltage: 13/18Vdc Output Voltage: 13/18Vdc Power Consumption: 50mA (Standby), 200mA (Normal), 350mA (Max.) Satellite Positions: 60 Calibration Function: Yes (Go to 0°) Manual East/West Buttons: Yes (build-in on the bottom of the mount) Limit Protection: 1. Fixed type with micro switches 2.Programmable Software Limit 3. Current Limit Positioning Sensor: High Resolution Hall Effect Sensor Connector: F-type Weight: 3,1Kg / 3,5Kg (Gross) Dimension (Mount): 345 x 168 x 110mm³ (Gross)
__________________ _www.Nottstalgia.com The Nottingham Forums | ||
|
| |
|
04-03-2008
| #6 | ||
| Specialist Contributor Join Date: 07-08-2005 Location: west yorkshire, uk
Posts: 1923
Thanks: 5
Thanked 43 Times in 37 Posts
My System: triax td88 motorised, Vantage x221tsci, tms-1500ci, skystar 2, diablo v2.3, zone 2 minidish - setanta | people also rate the dark motor, i've never used one so cant say about my motor has recently gone faulty so looking for another one and thought about the stab 120 or a technomate sg2200 or that dark motor metal gear one | ||
|
| |
|
04-03-2008
| #7 | ||
| Regular Member Join Date: 28-08-2005 Location: Nottingham
Posts: 183
Thanks: 18
Thanked 0 Times in 0 Posts
My System: 'Fortec Star Passion' (& a dead SL65) One of them big Woks on the outside, and a thingy that moves it about a bit. | I'm tempted to strip the motor down as I suspect a loose connection? Anyone done this? Are springs likely to fly out in all directions?
__________________ _www.Nottstalgia.com The Nottingham Forums | ||
|
| |
|
04-03-2008
| #8 | ||
| Regular Member Join Date: 28-08-2005 Location: Nottingham
Posts: 183
Thanks: 18
Thanked 0 Times in 0 Posts
My System: 'Fortec Star Passion' (& a dead SL65) One of them big Woks on the outside, and a thingy that moves it about a bit. | Google search found Southern Satallites, a sponsor here? 07-02-08, 02:40 PM Dark Motor Special Price High-speed DiSEqC motor for dish sizes up to 1.4m. Metal Gearing! - Protocol: DiSEqC 1.2 & Goto “X” 1.3 - Compatible Receivers: Receiver with DiSEqC 1.2 or Interface Box - Antenna Size: 140cm Max - Speed: 1.9 /sec (at 13V); 2.5 /sec (at 18V) - Azimuth Angle: 80 East ~ 80 West (160°) - Elevation Angle: 25~75 - Input Voltage: 13 / 18Vdc - Output Voltage: 13 / 18Vdc - Power Consumption: 50 mA (Standby), 200mA (Normal), 350mA (Max.) - Satellite Positions: 60 positions Limited numbers of these motors just £39.95 each! P&P £9 __________________ Before you buy contact southernsatellite.co.uk on 01892 833007. We won't be beaten on price!
__________________ _www.Nottstalgia.com The Nottingham Forums | ||
|
| |
|
04-03-2008
| #9 | ||
| Super Moderator  Join Date: 17-05-2007 Location: Kent,UK
Posts: 2396
Thanks: 41
Thanked 283 Times in 274 Posts
My System: Technomate TM6800D & TM1000D+ receivers, Stab H-H90 motorised Triax 1m dish 42E to 30W. Fixed Orbital 1m on 26E, 2 x minidishes.DigitAlB movies. A Bigsat BS-S77CX and a Sky Dodgibox. | Yes, he is one of the site sponsors.  I bought a dish from him, I got it really quick and at a good price too. That is a special price for the forum that you found that information. I suggest you mention satellites.co.uk when ordering to get it at that price(hopefully).
__________________ Last edited by Robbo71; 04-03-2008 at 02:05 PM. | ||
|
| |
Linear Mode
