technomate setup

**satelliteman** · 23-07-2008

Nope.......... those conifers wouldn't cause a problem for THOR.

Remember Thor 1W will be the highest point of the arc and at the moment you should have line of sight.

Rig looks neat and tidy and motor & dish looks Ok.

Very nice strong wall bracket

Keep at it

SM

**Robbo71** · 23-07-2008

From the photo, the trees look barely higher than the dish, Thor is going to be about 30 degrees up. Also you said in previous posts that you were able to get some good quality signals.

Leylandii are a pain though, I had to get my neighbour to cut all his down, as they were as high as the house.

**satelliteman** · 23-07-2008

You may have problems with other satellites eventually if left to grow in which case...............

kingcarp69 · 23-07-2008

on the dishpointer.com under dish data when i put in my location and the Thor satellite it comes on with a figure of 29.7 for the elevation. Is this accurate and is it taking about the elevation on the actual dish bracket or the motor. Would it be worth a try setting this as a starting point. The dish bracket is currently on 22.

**satelliteman** · 23-07-2008

It's on the dish bracket. The motor 'EL' has already been set.
Some 'EL' brackets on dishes are not accurate.

P.S 22 sounds about right

**Robbo71** · 23-07-2008

The angle on dishpointer is the angle from the horizon up to the satellite. It is a calculated value. How accurate, I haven't a clue, but always useful as a guide.

The angle given is not the same as you need to set, as you have a motorised dish. The shaft sticking out the motor is not necessarily vertical, so the elevation markings on the dish will not correspond to what dishpointer says. The angle of dish face however will be as though it is on a fixed mount, when set up properly.

For example if you stuck your dish on the top of your wall bracket, and set the dish elevation to 30, that should be roughly right for thor and that is how the dish should look when its on the motor (when the motor has been sent to Thor)

**satelliteman** · 23-07-2008

Latitude of 52 OR Elevation of 38 (same thing on motor)

30 - 7.5 Declination angle = 22.5 dish Elevation

SM

**satelliteman** · 23-07-2008

So the dish will be at the same angle as 29 degree as per dishpointer because you have set the motor shaft angle to ( lat/El on motor scale)

kingcarp69 · 26-07-2008

now up and running, but had to have someone come and do it. Thanks to all you guys who posted help. Just got to find the best channels for the english football and films

**satelliteman** · 26-07-2008

Glad your up and running

You did most of the work anyway, LOl

Out of interest, what sort of money did you spend to get a pro out?

Re - TM6900 sport and films. There are a few packages open; should be just the ticket.

SM

kingcarp69 · 27-07-2008

£80

, Where can i find more info on other packages

**satelliteman** · 27-07-2008

That's a fair price

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)