EMP Centauri P 168-W V2 & DREAMBOX

lamaislam

I purchased the disecq EMP Centauri 8x1 P 168-W V2 but I can not configure it for the Dreambox.
I connected the lnb as follows:
IN 1 ---- Motor Stab
IN 2 ---- Hotbird
IN 3 ---- Astra
IN 4 ---- Hispasat
IN 5 ---- Turkisat

I followed the directions on the DEC proposed by various users on various topics including the forum. The result is that the engine is working but still no signal on the parables.

Someone who uses the same disecq dreambox and connecting motor and more parables fixed can you please post your configuration?

Analoguesat

This should help:

Up to 8 lnb's on your dreambox - in pictures

Analoguesat's message to the world Analogue forever!

lamaislam

tried this configuration:

LNB0- Motor
Toneburst= Niente-Mod.Diseqc=1.2-Param.Diseqc=A/A-Ripet.Diseqc=Niente-Uncommited Swicth=Entrata 1, no selection 6/7/8.
Swicth Centauri 8X1 collegamento a IMPUT 1.

LNB1-Hotbird
Toneburst=niente-Mod.Diseqc=1.1-Param.Diseqc=A/B-Ripet.Diseqc=2-Uncommited Swicth=Entrata 1 - 6/7/8 no selection
Swicth Centauri 8X1 collegamento a Imput 2.

LNB2- Astra
Toneburst=niente-Mod.Diseqc=1.1-Param.Diseqc=B/A-Ripet.Diseqc=2-Uncommited Swicth=Entrata 1 - 6/7/8 no selection.
Swicth Centauri 8X1 collegamento a Imput 3.

LNB3-Hispasat
Toneburst=niente-Mod.Diseqc=1.1-Param.Diseqc=B/B-Ripet.Diseqc=2-Uncommited Swicth=Entrata 1
6/7/8 no selection.
Swicth Centauri 8X1 collegamento a Imput 4.

LNB4-Turkisat
Toneburst=niente-Mod.Diseqc=1.1-Param.Diseqc=A/A-Ripet.Diseqc=2-Uncommited Swicth=Entrata 2
6/7/8 no selection.
Swicth Centauri 8X1 collegamento a Imput 5.

The motor works, but I have not fixed the signal

Analoguesat

To start with disconnect the motor and ignore it for now. See if you can get the fixed dishes working.

Analoguesat's message to the world Analogue forever!

Robbo

Diseqc 1.0 switches don't always work with motors. Yet you have used Diseqc1.0 to switch between the motor and three of the other LNBs.

Might be worth a try using the uncommitted (diseqc1.1) for switching between motorised and fixed.

i.e

uncommitted 2 ->motor

uncomitted 1 -> Fixed LNBS via Diseqc 1.0 (AA AB BA BB)

lamaislam

ok...work.

Solution:
Motor LNB0 Diseqc 1.2 A/A Uncommited Entrata 1
Hotbird LNB1 Diseqc 1.1 A/B Uncommited Entrata 2
Astra LNB2 Diseqc 1.1 B/A Uncommited Entrata 3
Hispasat LNB3 Diseqc 1.1 B/B Uncommited Entrata 4
Turkisat LNB4 Diseqc 1.1 A/A Uncommited Entrata 5

Thank's