CCcam 2.1.0 & NDS 2/3 Cards

betty1234 · 30-04-2009

hi B16MCC i have the same card as Bram1nat0r

papampi · 01-06-2009

Originally Posted by B16MCC

More from Me. This morning I ran my Sly IT NDS3 card in the smargo using CCcam 2.1.0. My card is a 0002 'K' type.

Early indications are very good. I ran the card very slowly using the following line in CCcam.cfg.
Code:
SMARTCARD CLOCK FREQUENCY : /dev/usb/tts/0 3430000
I have yet to monitor CCcam in debug mode via telnet but what I can see so far is good. From inserting the card into the smargo it cleared a channel within a couple of seconds. My local ECM time was steady at 0.175 , so thats good. The temperature of the card was quite normal with no excessive heat to worry about, absolutley no signs of burn, although the test so far has totalled only about 15 minutes.

This test was simply to run the card for my own local use. I will now expand the test to share it and perhaps increase clock speed slowly. I'll report back further findings. At this time I have no need nor interest in trying the card in the internal reader. I would recommend against it for the price of a smargo.

Hi Bro
thanks for the info !
I just get my new Sky Italy white k-type card and as I'm a bit afraid to burn the card i wants to confirm the settings first !
I have DM-800 with latest gemini 4.2 and smargo smartreader +and linux ubuntu server .
which combination is best option fo me and the card :
1- DM-800 and Smargo and CCcam 2.1.1 ( I dont like this setup as dm crashes from time to time )
2- Ubuntu server and Smargo and CCcam 2.1.1
3- whatever you say !

then its that the card is not active yet and i dont have the official receiver ! how do I activate the card !?
I read some where this process :
1- put dm on common interface
2- put dm on a sky channels
3- insert the card
4- telnet and run newcs
5- frm BP run CCcam 2.1.1
6- have a bear and wait
is this ok or i should I just put it in smargo with dm or ubuntu and wait !?

please any who has the experience help me set it up sooner !
thanks

djremmit · 3 Weeks Ago

I have an irritating issue: With CCCAM and NEWCS I do have a picture, but the entitlements don't get updated... (Blue SKY card)

Any help is welcome

**WildBit** · 3 Weeks Ago

Hi, welcome to the board. You might want to introduce yourself to the rest of the community... I have no direct experience with SlY DE but if it's a card similar to the new white SlY UK card than you will need MGcamd + NewCS . There are many posts on this issue, just follow the thread containing word "0963"

djremmit · 3 Weeks Ago

@Wildbit, thanks for the welcome.
The issue I have is with the old S|Y UK card. I did not receive the white one yet.
I have been running Newcamd with NewCS in the past without any problems, but made the move to CCCAM to keep other cards working as well: running S|Y DE without any problem because its Betacrypt, Cana*dig NL on SECA2+ and AR*NA DE via Cryptoworks.
(The Cryptoworks also refuses the updates, but that's less bothersome as S|Y UK: for Crypto I have a Cam to update the card, for S|Y UK I have to set up a seperate dish without diseq, install the original receiver and wait.....)
Thanks,
DJ
btw all my DM's are running Gemini

prenz · 3 Weeks Ago

This seems to be an issue of NewCS/CCcam - no entitlement updates on my system as well, neither blue nor white card. Run mgcamd as client and entitlements will update.

**B16MCC** · 3 Weeks Ago

djremmit, Welcome to the fight..

Are you hosting the card in NewCS or direct in CCcam. If its in NewCS, there's no need for it. Use CCcam direct for that card and it should be just fine.

GMAN6 · 3 Weeks Ago

I use cccam 2.1.0 on blue and my entitlements are at end of december now it updates consistently unlike the white card.

**WildBit** · 3 Weeks Ago

If you've activated the white card on the same account, your blue card will surely be killed if you allow emms to reach it

**Oakey22** · 3 Weeks Ago

I have had white card used for about a month now with my blue card in the dreambox, white card still in my sky box. I have EMM's getting through aswell and the entitlements are December now.

**B16MCC** · 3 Weeks Ago

The old card is only killed when the sly box phones home to acknowledge the new white card has been inserted.

***Burnham Beech*** · 3 Weeks Ago

I would guess most regulars on this forum don't have the phone line connected.

Surely Ѕky will stop send updates to the old blue card at some point?

**stvy** · 3 Weeks Ago

Hi,

Currently I have my new white card in my $ky hd box. It works. It upgraded to the new card no probs. NB I dont have the phone line connected and I dont have too.. My subscription is an "unsubsidised" and I have no obligation to have the telephone line connected.

I left my old blue card in the dm800 and it continues to get updates. Right now I am good upto december.

I am just hoping to keep on going until there is a nice and easy white card solution that takes care of the updates etc... I currently use cccam.

thanks,

sTvy

**WildBit** · 3 Weeks Ago

yup, that explains it... the tech had to get a call back to get the white card activated for some reason

djremmit · 2 Weeks Ago

Yes, everything works perfect after I removed newcs!
Thanks

peque · 3 Days Ago

Hey there,

I've succesfully followed the most of the forum here and managed to get my DM800 up and running with a Via***t nds card.
But unfortunably the HD channels aren't working.
Using Gemini 4,5 and CCcam 2.1.3 and got the normal channels running.

Here's my addings to CCcam.cfg

Code:

SERIAL READER : /dev/usb/tts/0 smartreader+                                     
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0 6860002

Which I get a picture and a good result with - But not the HD channels.
When starting CCcam - It looks good, but it's not possible to get HD working???

Code:

17:53:14.270 CCcam: ======================================================================
17:53:14.275 CCcam: starting CCcam 2.1.3 compiled on Nov 14 2009@00:37:55
17:53:14.277 CCcam: ======================================================================
17:53:14.279 CCcam: online using nodeId d5be2XXXXXXXXXXXXXX
17:53:14.306 CCcam: dvb api3 detected
17:53:14.310 CCcam: DM800 detected
17:53:14.312 CCcam: create 8 cam device(s)
17:53:15.145 CCcam: card detect fail
17:53:15.443 CCcam: added 0 keys from /var/keys/SoftCam.Key
17:53:15.445 CCcam: added 0 keys from /var/keys/AutoRoll.Key
17:53:15.448 CCcam: static cw not found or bad
17:53:15.450 CCcam: parsed 0 entries from /var/etc/CCcam.prio
17:53:15.673 CCcam: added 1274 provider names from /var/etc/CCcam.providers
17:53:15.676 CCcam: added 4 channel names from /var/etc/CCcam.channelinfo
17:53:15.679 CCcam: server started on port 12000
17:53:16.069 CCcam: /dev/usb/tts/0 configured clock frequency: 6860002 Hz
17:53:16.353 CCcam: nds card found
17:53:16.983 CCcam: nds: using boxkey XXXXXX
17:53:18.201 CCcam: card added to broker with caid 90f
17:53:20.854 CCcam: found nds caid: 0x90f ecmpid: 0x859 id: 0x0
17:53:20.854 CCcam: found nds caid: 0x93e ecmpid: 0x9b id: 0x0
17:53:20.856 CCcam: cam[0] set PMT for sid=852
17:53:20.858 CCcam: start EMM
17:53:20.932 CCcam: local ecm -> card /dev/usb/tts/0 0x90f(0x000) sid 0x852
17:53:20.965 CCcam: EMM demux 1 set
17:53:20.968 CCcam: EMM: start filter on nds emmpid: 0xc0 caid: 0x90f id: 0x0
17:53:20.968 CCcam: EMM: not interested in 093E:000000
17:53:21.215 CCcam: local ecm <- card /dev/usb/tts/0 ok
17:53:21.220 CCcam: cam[0] ecm odd ok caid:0x90f id:0x0 pid:0x859 VIASAT (5E/75E/1W)
17:53:30.698 CCcam: local ecm -> card /dev/usb/tts/0 0x90f(0x000) sid 0x852
17:53:30.982 CCcam: local ecm <- card /dev/usb/tts/0 ok
17:53:30.987 CCcam: cam[0] ecm even ok caid:0x90f id:0x0 pid:0x859 VIASAT (5E/75E/1W)
17:53:41.335 CCcam: local ecm -> card /dev/usb/tts/0 0x90f(0x000) sid 0x852
17:53:41.618 CCcam: local ecm <- card /dev/usb/tts/0 ok
17:53:41.622 CCcam: cam[0] ecm odd ok caid:0x90f id:0x0 pid:0x859 VIASAT (5E/75E/1W)
17:53:42.841 CCcam: local emm -> card /dev/usb/tts/0 0x90f(0x000)
17:53:42.882 CCcam: emm already handled (found in cache)
17:53:42.960 CCcam: local emm <- card /dev/usb/tts/0 ok

Does anyone have the rigth settings or isn't it possible to makje HD run yet.
Many have shown pictures on the net - but not the solution.

**B16MCC** · 2 Days Ago

Judging by the config sample you have quoted you have not specified a boxkey, I've no idea whether this card needs one or not but as the other popular NDS3 card currently in use DO require one, I'd be very tempted to generate one and add it to the config.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

CCcam 2.1.0 & NDS 2/3 Cards Dreambox information exchange on the best dreambox software images and help with all other operational problems with your Dreambox. The ultimate Dreambox satellite TV support forum.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)