How To Install Omnikey Reader On Dreambox

moelikepie · 3 Weeks Ago

Originally Posted by WildBit

Finally a clear picture on what you are doing

The cards probably have the same CAID and therefore you will need to tweak the priority file. Why use both???

i knew we'd get here in the end!

i have the irish card for everything, and i have the uk freesat card for Channel 4 HD.

yes both cards are 0963. do you know what i have to change to make the cards work?

**WildBit** · 3 Weeks Ago

You can add an entry in the CCcam.prio file but I don't know if it will work with 2 identical cards

Originally Posted by moelikepie

i knew we'd get here in the end!

i have the irish card for everything, and i have the uk freesat card for Channel 4 HD.

yes both cards are 0963. do you know what i have to change to make the cards work?

moelikepie · 3 Weeks Ago

ok, i'll look into that. at least i know what im looking for now.

thanks very much wildbit,
cheers
adam

**WildBit** · 3 Weeks Ago

If you really want to look into this then I suggest you look at cccam.cfg as well, you might be able to filter the channel directly through the C line. It would be a lot simpler if the second reader was installed on the second box

moelikepie · 3 Weeks Ago

Originally Posted by WildBit

It would be a lot simpler if the second reader was installed on the second box

i was thinking this alright but the second box isnt always going to be at home, it'll be brought to our other house quite a bit so i'd rather not do this.

anyway, i'll start doing some reading and post here if i find anything. thanks again

***Sharkadder*** · 3 Weeks Ago

can you not just use a dns address on the second box and tell its address to update via inadyn, that way when you move the box to another house, the dns address can still be accessed, just on a separate ip address.

**Crusty Burke** · 1 Week Ago

Right - got my Irish card in the Omnikey reader, and everything is now working nicely.

I use the latest Nabilosat Blackhole image for my DM800 and have finally managed to get NewCS configured and running. I use MGCamd 1.30d in the DM800 and what I like about this is that the card is not running hot at all!

What I really would like to do now is to start NewCS up when the DM800 starts up. At present I telnet to the DM800 and invoke the newcs command /usr/bin/newcs_1.67.pcsc -C /etc/tuxbox/newcs.xml command string - where should I start, and if a particular file is edited can someone tell me what directory the file lives in?

**B16MCC** · 1 Week Ago

/etc/init.d/bootup

**shumifan50** · 1 Week Ago

You could add the line to /user/script/mgcamd_1.31_cam.sh.
If you look in this file you will see a "case" statement with "start)" followed by running of "/usr/bin/$CAMD_BIN &". Insert your execution line just before it.

There is also a "stop)" case where the cam is killed. You should add a line
"killall -9 newcs_1.67.pcsc" just before the exisitng killall.

By doing this the cam will properly get stopped and started through the blue panel when you stop and start mgcamd. I noticed that the script does not support "restart", so when using the blue panel it is advised you do a "stop" and then a "start" of the cam.

NOTE: adjust your filenames and commands to suit mgcamd 1.30 - the above is for 1,31.

**Crusty Burke** · 1 Week Ago

Originally Posted by shumifan50

You could add the line to /user/script/mgcamd_1.31_cam.sh.
If you look in this file you will see a "case" statement with "start)" followed by running of "/usr/bin/$CAMD_BIN &". Insert your execution line just before it.

There is also a "stop)" case where the cam is killed. You should add a line
"killall -9 newcs_1.67.pcsc" just before the exisitng killall.

By doing this the cam will properly get stopped and started through the blue panel when you stop and start mgcamd. I noticed that the script does not support "restart", so when using the blue panel it is advised you do a "stop" and then a "start" of the cam.

NOTE: adjust your filenames and commands to suit mgcamd 1.30 - the above is for 1,31.

Thanks a million - made the changes as suggested and now Newcs starts automatically on startup.

romcard · 1 Week Ago

Still trying to get my Omnikey 3121 to work on my DM800.

On the USB ports which way are they numbered ?

Is bottom one node 0 and the top one node 1, or, the top one node 0 and the bottom one node 1 ??

romcard · 6 Days Ago

_http://www.megaupload.com/?d=CZVLYHCH
use this to replace the version in /usr/bin as it is the pcsc file renamed

blaydonboy · 6 Days Ago

I have been trying for 3 days now to get the omnikey reader to work on my db 7025.It just won`t work.I`ve gone over B16MCC`s excellent post at the thread start a thousand times and still no joy.I`ve loaded the drivers needed to use the omnikey.But when I try to start the file newcs.mips.pcsc, which I have renamed to newcs_1.67.pcsc,using telnet I get the message it can`t be found.My db just doesn`t see the reader.

help!!!

BB.

blaydonboy · 6 Days Ago

After trying to get my db internal reader to read my new sky white card,I finally succeded using newcs 1.66 and Cccam 2.1.1.However I now have two problems,one is I want to continue to let the cs I`m in see my card and two I want to use an external reader to read my card as I have heard about heating problems with the card,I`m not so happy to leave it in the internal reader.I have tried for 3 days now to get my omnikey reader to operate in my db 7025.I have went over B16MCC first post a thousand times with no joy.I can load the drivers needed in my db no problem.I`ve also loaded all the files I get from the newcs-1_67RC1 download.I rename the newcs.mips.pcsc file to newcs_1.67.pcsc and then try to start it through telnet,but I get the message file not found.

Help!!!!!
BB.

blaydonboy · 6 Days Ago

Sorry for the double post,I didn`t think the first one had gotten through.

BB.

**andel** · 6 Days Ago

have you tried the full path via telnet.....
/usr/bin/newcs_1.67.pcsc -C /etc/tuxbox/config/newcs.xml

blaydonboy · 6 Days Ago

Thanx for the quick reply Andel.Well that line produced a lot details,but still no joy with the reader.I`m now doing a clean install of my image and I will try again.Can you tell me if I should install all the files I get from the newcs-1_67RC1 download@ Or do I just install the newcs.mips.pcsc file and rename it?

BB

**andel** · 6 Days Ago

no its just the newcs.mips.pcsc you need

What happens if you telnet and enter dmesg.
Do you see the omnikey listed?

blaydonboy · 6 Days Ago

omnikey AG shows in the details when I telnet dmesg.

BB.

**andel** · 6 Days Ago

ok so start newcs using
/usr/bin/newcs_1.67.pcsc -C /etc/tuxbox/config/newcs.xml

you should get "Ready to go"

then try to access the newcs web interface

romcard · 5 Days Ago

Do what I suggested in post 87, works perfect as it is the pcsc file renamed. Overwrite the original file in /usr/bin and bobs yer auntie.

This way it works on it's own every boot, no need to telnet or anything.

Make sure you use common interface or summat while you overwrite just in case.

Then select the combined cam and away you go.

Obviously you still need to install the 4 files as well.

blaydonboy · 5 Days Ago

Sorry for being thick here,but where is web interface and how do I open it?

Thanx.

BB.

blaydonboy · 5 Days Ago

Originally Posted by andel

ok so start newcs using
/usr/bin/newcs_1.67.pcsc -C /etc/tuxbox/config/newcs.xml

you should get "Ready to go"

then try to access the newcs web interface

I just keep getting a loop saying reset failed.

BB.

**andel** · 5 Days Ago

paste
_http://your_dreambox_ip:8080
into your browser but replace with your correct ip address (and remove the _ at the start)
eg _http://192.168.1.2:8080

**B16MCC** · 5 Days Ago

Just a quick note before anyone asks, You cannot use an Omnikey reader with the new CCcam 2.1.3 or any other CCcam. CCcam does not support PC/SC.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)