Newcs + omnikey reader

renwich · 08-09-2009

Im trying to help a m8 out getting his white card working with newcs + cccam

this is running on a ubuntu desktop 9.04

card reader = omnikey 3121

pcsc_scan shows the card inserted and recognises it

got newcs.i686.pcsc in /var/bin and it runs

Code:

 sudo /var/bin/newcs.i686.pcsc -C /var/etc/newcs.xml

this runs and outputs

Code:

[ 20:09:28 ] [ NDS ] Status Word from Card: 9020
[ 20:09:28 ] Card reader unlocked for reader Omnikey [0]
[ 20:09:28 ] [ 0963 ] Init took: 0.775605
[ 20:09:28 ] [ Loader ] Card 0963 on port 0 ready
[ 20:09:28 ] [ Card queue 0 ] Starting...
[ 20:09:28 ] [ Loader ] Starting Newcamd Server on port 12010
[ 20:09:28 ] [ Newcamd ] Newcamd thread Server started on port 12010
newcamd: main loop
[ 20:09:28 ] [ NewCS ] Ready to GO! :)

then drops to the prompt, but running ps -e shows newcs as a running process

should it or should it run in debug mode ..?? ie output what its doing to the screen

heres the newcs.xml

Code:

<newCSconfig>
        <readers name="Standard Omnikey on PC">
                <device>
                        <name>Omnikey</name>
                        <type>pcsc</type>
                        <mhz>368</mhz>
                        <node>0</node>
                        <parity>odd</parity>
                        <reset>normal</reset>
                        <export>Yes</export>
                        <enabled>Yes</enabled>
                        <boxkey>00000000</boxkey>
                        <blocksa>No</blocksa>
                        <blockua>No</blockua>
                        <blockga>Yes</blockga>
                        <blockC0>Yes</blockC0>
                        <carddetect>Yes</carddetect>
                        <newcamd_port>12010</newcamd_port>
                        <autosid>Yes</autosid>
                        <priority>round</priority>
                </device>
        </readers>
        <radegastserver>
                <port>10001</port>
                        <allow>
                                <hostname>localhost</hostname>
                        </allow>
        </radegastserver>
        <cache>
                        <emm>20</emm>
                        <ecm>-1</ecm>
        </cache>
        <httpd>
                <server>
                        <port>8080</port>
                        <enabled>yes</enabled>
                </server>
                <user>
                        <name>admin</name>
                        <password>admin</password>
                        <accesslevel>admin</accesslevel>
                </user>
        </httpd>
              <debug>
                        <password>NewCSpwd</password>
                        <mode>simple</mode>
                        <level>internal</level>
                        <type>all</type>
                        <output>console,tcp</output>
                        <tcp_port>1001</tcp_port>
                        <tcp_options>normal,init</tcp_options>
        </debug>
        <newcamdserver>
                        <enabled>Yes</enabled>
                        <name>newcs</name>
                        <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
                        <user>
                                <name>CCcam</name>
                                <password>CCcam</password>
                                <au>on</au>
                                <sidoverride>off</sidoverride>
                                <spider>No</spider>
                                <cardlevel>2</cardlevel>
                        </user>
        </newcamdserver>
  
</newCSconfig>

could it be a libcrypto file missing...??

this is whats installed

Code:

 sudo find / -name libcrypto*
/lib/libcrypto.so.0.9.8
/lib/i486/libcrypto.so.0.9.8
/lib/i686/cmov/libcrypto.so.0.9.8
/lib/i586/libcrypto.so.0.9.8
/usr/lib/libcrypto.so.0.9.8

it dosnt seem to allow the card to be shared to CCcam

but if I run the same stup on my own ubuntu (server 9.04) and a blue house freesat card , newcs outputs everthing to the screen

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Newcs + omnikey reader Dreambox information exchange on the best dreambox software images and help with all other operational problems with your Dreambox. The ultimate Dreambox satellite TV support forum.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)