Current Nabilosat BH V0.12 A/V settings

marcaaron20

These are my current settings on my Dreambox 8000 and using Nabilosat BlackHole V0.12, (just thought I'd write them down before I make changes);

A/V SETTINGS:
Video Output: DVI
Mode: 1080i
Refresh Rate: 50Hz
Display 4:3 Content As: Just Scale
Display 16:9 Content As: Letterbox
AC3 Default: Yes
AC3 Downmix: Yes
General AC3 Delay: 0
General PCM Delay: 0


VIDEO ENHANCEMENT SETTINGS:
Contrast: 128/256
Saturation: 128/256
Hue: 128/256
Brightness: 128/256
Scaler Sharpness: 13/26
Split Preview Mode: Off
Sharpness: 0/256
Auto Flesh: 0/4
Green Boost: 0/4
Blue Boost: 0/4
Dynamic Contrast: 0/256
Block Noise Reduction: 0/5
Mosquito Noise Reduction: 0/5
Digital Contour Removal: 0/5


AUTO RESOLUTION SETTINGS:
Auto Resolution Enable: No

AUTO RESOLUTION DEFAULT SETTINGS UNDER: YES
SD 25/50HZ Interlace Mode: Default
SD 30/60HZ Inerlace Mode: Default
SD 25/50HZ Progressive Mode: Default
SD 30/60HZ Progressive Mode: Default
HD Interlace Mode: Default
HD Progressive Mode: Default
Enable 720p 24 Mode: Default
Enable 1080p 24 Mode: Default
Enable 1080p 25 Mode: Default
Enable 1080p 30 Mode: Default
Show Info Screen: Yes
Delay X Seconds After Service Started: 1 Second
Running In Testmode: No
De Interlacer Mode: Auto
De Interlacer Mode For Progressive Content: Auto


I am wanting to know if these are the correct optimum settings that I am using??

also this post is for people to share there current, default and optimum settings so that we can all view our results against others to try and improve both our HD and SD content on our Dreamboxes

marcaaron20

will the following post on this forum apply to me even if i am using a 1080i HD LCD TV??

h**p://www.sat-universe.com/showthread.php?t=143659

Thanks,

marcaaron20

?? any help ??

DeepDiver

You can make as many changes as you like. Before you do so, just make sure to create a backup with the Software Manager. It will allow you to backup all your Enigma2 custom settings, as well as you channels list, timers, network config. You can also backup additional files, user defined.


I suggest you do different tests, as TV may offer different performance.
I would also NOT suggest to use 1080i as default with the AutoResolution not in use. This means that ALL your channels, including SD channels will be upscaled to 1080i, with poor result.
If you wish to enjoy both SD and HD channels, you MUST setup the AutoResolution features to enable 1080i only on HD channels.

Memento Audere Semper

marcaaron20

so how do I do this?? which settings will i need to change??

DeepDiver

Menu/Setup/AutoResolution and enable it. Then, set it to use HD format for HD channels only.

Memento Audere Semper