Need help usb to com port

zago1819

Hi all friends .
I have not com port in my pc so i bought usb to com port cable.but then am conecting it with my pc and installing driver and using dream up.for puting image .its not conecting my dreambox. Befor i was used dreamup and i was put images in dreambox.but not with this pc.
Now i did every thing but it not conecting any one used usb to com plz help me thank


thanks

mhku

The USB to serial cable is not very reliable with a Dreambox. Depending on the image you can flash a dreambox using a web browser and therefore use a network cable.

I've not done this but search may turn it up.

zago1819

with network cable i can use same program dreamup? and put image darkstar 2?
thanks for repl.

compufunk

You cant use Dreamup without a working null modem connection, DreamUpLAN may work but I've never used it.

Try flash wizard pro which is attached here. You can use it to flash over the network.

Attached Files

FLASHWIZARD_PRO_5.zip (621.6 KB, 44 views)

zago1819

i was never use it i download but i dont know how it will work.
one other thing i see i miss one driver of my loptop.maybe becuse of that my com not working???
n Intel(R) ICH8M LPC Interface Controller - 2815

for xp where i can download that i was not find it

mhku

Download what?

zago1819

i was asking about that driver.so i will do later about my come now i was go my friend home and i install darkstart2 in my dm500s . but its not showing signal of satlitte.why?it can be that tuner block??and i can get any satlitte?not auto and not manualy?

mhku

Have you checked your dish and cables? Do yo use a motor?

zago1819

i have not motor and my other dm working same cabel .

Turok

Hello!
my new gigabyte board,has also no comport,i recogneized this after puchase,now i bought in auction house usb comport,but the driver will not work under Xp,is there any universal xp driver,for this comport usb protokoll?
thanks!
are any dos drivers also avalible?

BombedOne

Turok, your motherboard DO has com port, just no connector on back. Go to any computer hardware store, buy youself com port bracket for back panel and that's all

Llew

Make sure the lead is long enough to reach a spare slot in the panel. I had to rearrange my PCI cards to give me a space. The port (COMA) is on the bottom of the board (at least it was on my Gigabyte mobo.)

Llew

Celebrating Ten Years Of The Forum As A Founder Member

Turok

I Must look on the mainboard itself,not every modell has this contector ,in later series,the problem is that the manual often is printed in revision 1,0 Hardwarelayout,then your mainboard has never revision from the same series,this results,that not all conection are on the same place,,you look in the picture ,and the diagram of hardware layout,is often difrent,from later revisions!

Llew

It'll be marked COMA (10 pin header).

Llew

Celebrating Ten Years Of The Forum As A Founder Member