dm-600 technical help pleaseDreambox600 - Support for the Dreambox 600 DM-600 satellite receiver. | |
![]() |
| | LinkBack | Thread Tools | Display Modes |
![]() | ![]() |
| |||||||
dm-600 technical help pleaseDreambox600 - Support for the Dreambox 600 DM-600 satellite receiver. | |
![]() |
| | LinkBack | Thread Tools | Display Modes |
| | #1 | ||
| Member Join Date: 14-08-2008 Location: birmingham
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
My System: sky plus box |
hi im looking for some help if you are able. im looking for a box that i can use in basicly the same way as my sly plus box. i would like to be able to record a channel while i watch another have the ability to rewind fastforward ect ect. now i know i can buy the dreambox 7025 or the 800 hd but these to be honest are to expensive for me at the moment as im a newbie and am still learning at this moment so am looking to spend as little as possible at the minute incase things dont work out the way i want. so what i would like to know is that i have been told that i could buy a cheaper dreambox 600 add a second turner and a hhd. im told this would allow me to do the thing i want. can you confirm this is correct and what version dm-600 i would need also how hard would it be to fit a second turner and hdd? is there a guide on doing this? i would also like to know i have flashed and setup and eagle box and am told it is the same process for the dm-500 again if i buy the dm-600 would the flashing and setup be the same for the dm-600 and would installing a second turner make the flashing any harder? thanks for all and any help sut | ||
| | |
| | #3 | ||
| Specialist Contributor Join Date: 07-05-2008 Location: NW, Ireland
Posts: 1398
Thanks: 126
Thanked 231 Times in 198 Posts
My System: DM 600-S, AB IPBox 9000HD, Moteck SG2100, Fracarro Penta 85 dish, + some puters | Your cheapest (but not the most practical) option would be to keep the Eagle and buy a DM600. When you are recording something with the DM600 you can use the Eaglebox to watch another channel. Flashing is easy and so is fitting a hard drive, so don't worry about that. I don't know what kind of remote comes with the EagleBox, but if it uses the same IR controls as the Dreambox remote, then you will have problem because when you use the remote, both boxes will be accepting the commands. | ||
| | |
| | #4 | ||
| Member Join Date: 14-08-2008 Location: birmingham
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
My System: sky plus box | Your cheapest (but not the most practical) option would be to keep the Eagle and buy a DM600. When you are recording something with the DM600 you can use the Eaglebox to watch another channel. wouldnt i need 2 stream thou 1 for each box? thanks | ||
| | |
| | #5 | ||
| Manic Midlander Moderator Join Date: 24-09-2006 Location: West Midlands. UK
Posts: 740
Thanks: 6
Thanked 81 Times in 75 Posts
My System: Dreambox 7020si, Technomate TM600, Technomate TM9100 Fracarro Penta 85 Dish, Televes 0.6dB Quad lnb, TM SG2200 motor. 60cm Channel Master BSB dish on 28e, Mti Blueline 0.2db Twin Lnb. Rover ST-4 Meter Cyfra+ Subscription | You would need a separate lnb feed for each box | ||
Sanity is nothing more than an excuse to be boring <<<<<<<<****** Dreambox DM7020 Si , S.I.F 1.9.3d ******>>>>>>>>> <<<<<<<<******** Technomate TM9100, EDG 4.4 ******** >>>>>>>> <<<<<<<<<<******* Technomate TM600, UR 23 *******>>>>>>>>> | |||
| | |
| | #6 | ||
| Specialist Contributor Join Date: 07-05-2008 Location: NW, Ireland
Posts: 1398
Thanks: 126
Thanked 231 Times in 198 Posts
My System: DM 600-S, AB IPBox 9000HD, Moteck SG2100, Fracarro Penta 85 dish, + some puters | Yes you would need a separate feed for each box, but if you want to be able to record while watching another program, you need a separate feed from the LNB anyway, whether you use two separate boxes or a DM7025. | ||
| | |
![]() |
| Bookmarks |
| Tags |
| dm600, technical |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
| |